Ranger RML-1500XL Installation And Operation Manual page 2

Atv / motorcycle lift

Hide thumbs Also See for RML-1500XL:

Table of Contents

Manual. RML-1500XL ATV/Motorcycle Lift, Installation and Operation Manual, Manual P/N 5900183,

Manual Revision E2, released May 2022.

agree that: you will give full attribution to BendPak Inc., you will not make changes to the content, you do not

gain any rights to this content, and you will not use the copies for commercial purposes.

Trademarks. BendPak, the BendPak logo, Ranger, and the Ranger logo are registered trademarks of BendPak

Inc. All other company, product, and service names are used for identification only. All trademarks and

registered trademarks mentioned in this manual are the property of their respective owners.

Limitations. Every effort has been made to have complete and accurate instructions in this manual. However,

product updates, revisions, and/or changes may have occurred since this manual was published. BendPak

Ranger reserves the right to change any information in this manual without incurring any obligation for

equipment previously or subsequently sold. BendPak Ranger is not responsible for typographical errors in this

manual. You can always find the latest version of the

manual for your product on the Ranger

website.

Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the

value of your new product. For full warranty details, contact your nearest BendPak Ranger dealer or visit

bendpak.com/support/warranty.

Safety. Your product was designed and manufactured with safety in mind. However, your safety also depends

on proper training and mindful operation. Do not install, operate, maintain, or repair the unit without reading

and understanding this manual and the labels on it. Do not use this product unless you can do so safely!

Registration. Go to

bendpak.com/support/register-your-product/

and fill out the online form to register your

product (be sure to click Submit).

Owner Responsibility. In order to maintain your product properly and to ensure operator safety, it is the

responsibility of the product owner to read and follow these instructions:

• Follow all installation, operation, and maintenance instructions.

• Make sure product installation conforms to all applicable local, state, and federal codes, rules, and

regulations, such as state and federal OSHA regulations and electrical codes.

• Read and follow all safety instructions. Keep them readily available for operators.

• Make sure all operators are trained, know how to safely operate the unit, and are properly supervised.

• Do not operate the product until you are certain all parts are in place and operating correctly.

• Carefully inspect the product on a regular basis and perform all maintenance as required.

• Service and maintain the unit only with approved replacement parts.

• Keep the manual with the product and make sure all labels are clean and visible.

• Only use this product if it can be used safely!

Table of Contents