Table of Contents
Advertisement
To reduce the risk of fire, do not operate in the vicinity of open containers of flammable liquids
(gasoline).
Adequate ventilation should be provided when working on operating internal combustion
engines.
Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
Do not use on wet surfaces or expose to rain.
Use only as described in this manual. Use only BendPak recommended attachments.
ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they
are not safety glasses.
To reduce the risk of injury, close supervision is necessary when this product will be used
around children.
To reduce the risk of injury, never attempt to lift more than the rated capacity.
The Lift uses pneumatic and hydraulic pressure; if your organization has Lockout/Tagout
policies, make sure to implement them after connecting the Lift to a power source.
Only operate your Lift between temperatures of +41°F to +104°F (+5°C to +40°C).
The Lift should only be operated by authorized personnel. Keep children and untrained
personnel away from the Lift.
Do not make any modifications to the Lift; this voids the warranty and increases the chances of
injury or property damage.
Do not use the Lift while tired or under the influence of drugs, alcohol, or medication.
Consider the work environment. Keep the work area clean. Cluttered work areas invite injuries.
Keep areas well lit.
Always make sure the Lift is secured on Safety Locks before attempting to work on or near a
Vehicle.
Make a thorough inspection of the product at least once a year. Replace any damaged or
severely worn parts, decals, or warning labels. Replace worn or damaged parts with BendPak or
BendPak approved parts and assemblies only.
BendPak recommends referring to the ANSI/ALI ALIS Standard Safety Requirements for
Installation and Service for more information about safely installing, using, and servicing your
Lift.
RML-1500XL is an ATV/ Motorcycle Service Lift. Use it only for its intended purpose.
You must wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Lift. Leather gloves, steel-toed work boots,
eye protection, back belts, and hearing protection are mandatory.
Keep loads balanced on the Lift. Clear the area immediately if a Vehicle is in danger of falling off
the Lift. Do not make any modifications to the Lift.
Modifications void the warranty and increases the chances of injury or property damage. Do
not modify any safety-related features in any way.
5
RML-1500XL ATV / Motorcycle Lift
P/N 5900183 — Rev. E2 — May 2022
Advertisement
Table of Contents
