1. Manuals
  2. Brands
  3. Ranger Manuals
  4. Lifting Systems
  5. RML-1500XL
  6. Installation and operation manual

Ranger RML-1500XL Installation And Operation Manual

Atv/motorcycle lift
Hide thumbs Also See for RML-1500XL:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Operation Manual
Manual P/N 5900183 — Manual Revision E — February 2020
Model:
• RML-1500XL
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠
DANGER
ATV / Motorcycle Lift
Read the entire contents of this manual before using this product.
Failure to follow the instructions and safety precautions in this manual
can result in serious injury or death. Make sure all other operators also
read this manual. Keep the manual near the product for future
reference. By proceeding with installation and operation, you agree
that you fully understand the contents of this manual and assume full
responsibility for product use.
1645 Lemonwood Dr.
Santa Paula, CA 93060 USA
Toll Free: 1 (800) 253-2363
Telephone: 1 (805) 933-9970
rangerproducts.com

Advertisement

Table of Contents
loading

Related Manuals for Ranger RML-1500XL

Summary of Contents for Ranger RML-1500XL

  • Page 1 Installation and Operation Manual Manual P/N 5900183 — Manual Revision E — February 2020 Model: • RML-1500XL Designed and engineered by BendPak Inc. in Southern California, USA. Made in China. ⚠ Read the entire contents of this manual before using this product.
  • Page 2 You can always find the latest version of the Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the value of your new product. For full warranty details, contact your nearest BendPak Ranger dealer or visit bendpak.com/support/warranty.

  • Page 3: Table Of Contents

    Motorcycle or ATV of up to 1,500 pounds / 680 kg high off the ground. More information about the full line of BendPak Ranger products is available online at rangerproducts.com. This manual is mandatory reading for all users of the RML-1500XL, including anyone who installs, operates, maintains, or repairs it. ⚠...

  • Page 4: Shipping Information

    • Do not leave the Lift until it is either engaged on a Safety Lock or fully lowered to the ground. • Do not use the product while tired or under the influence of drugs, alcohol, or medication. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 5 • Make a visual inspection of the product before using it each time. Do not use the product if you find any missing or damaged parts. Instead, take the unit out of service, then contact an authorized repair facility, your distributor, or BendPak Ranger by phone at (805) 933-9970 or by email at support@bendpak.com.

  • Page 6: Components

    Components The main components of the RML-1500XL ATV/Motorcycle Lift are: • Platform. The flat section on which you put the ATV or Motorcycle. Includes the Clamp Assembly (for clamping the front tire). The Platform is used standalone in Motorcycle Mode or with the Front and Side Extensions installed in ATV Mode.
  • Page 7 • Adjustable Legs. Located under the Ramp end of the Lift, they allow you to adjust how far down the Platform comes. What you want is for the top of the Ramps and the top of the Platform to be level with each other. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 8: Faq

    Q: How far off the ground will the RML-1500XL raise my Vehicle? A: It depends on which Safety Lock you engage on. The RML-1500XL has six Safety Lock positions, so you can raise your vehicle anywhere from 24 in / 610 mm to 41 in / 1,041 mm off the ground, whichever height is the right height for the work you are doing.

  • Page 9: Specifications

    Platform Height – 5th Lock Position 38.5" / 978 mm Platform Height – 6th Lock Position 41" / 1,041 mm Air Supply 90 to 160 psi Specifications subject to change without notice. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 10: Installation

    • Danger. When the Lift is in use, keep everyone away from it. Only the operator should be within 30 feet / 10 meters of the Lift during use. Do not set up the Lift in a well-travelled area. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 11 For safety purposes, only the operator should be within 30 feet /10 meters of the Lift during use. Not necessarily to scale. Not all components shown. BendPak Ranger recommends leaving an additional 12 inches / 305 mm of open space above the top of the Tie-Down Poles.
  • Page 12 5. Locate the plastic bag that holds the Nuts, Bolts, Washers, and the other items you are going to need during installation. BendPak Ranger recommends carefully laying them out near where you are going to install the Lift so that they are easily accessible when needed.
  • Page 13 10. Use the Lowering Pedal to lower the Lift until it engages on the top Safety Lock. You should only leave the Lift either fully lowered or engaged on a Safety Lock. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 14 The procedures in this Manual assume you are installing the Lift in ATV Mode. If you are installing the Lift in Motorcycle Mode, just ignore the instructions for those components that are only used in ATV Mode. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 15 Mode you want to use. If not, go back and do those things before proceeding. This section does not cover installing the Clamp Assembly; it is covered in the next section. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 16 Make sure to put the flanges under the ATV Ramps into the Placement Holes on the Base. 12. Test each ATV Ramp to make sure it is stable. 13. If desired, add the Motorcycle Ramp on top of the ATV Ramps. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 17 3. Use four of the Bolt, Washer, and Nut sets to secure the Handle Assembly to the Platform. BendPak Ranger recommends orienting your Bolts, Washers, and Nuts as shown here. 4. Use four more Bolt, Washer, and Nut sets to secure the Handle Assembly to the Moveable Clamp Arm.

  • Page 18: Operation

    If you see anything wrong, take the Lift out of service, disconnect it from its air supply (if connected), and then contact an authorized repair facility, your distributor, or BendPak Ranger by phone at (805) 933-9970 or by email at support@bendpak.com.
  • Page 19 Raising Pedal. 9. Go just past the desired height, then stop raising the Platform (stop pumping the Raising Pedal or release the Raising Trigger). RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 20 6. When the Lift is fully lowered, continue to hold down the Lowering Pedal for several seconds, then release it. 7. Walk the vehicle off the Platform. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 21 Base back down onto the ground. Make sure the Lift cannot move on the Casters before raising a vehicle at the new location. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 22: Maintenance

    • Hydraulic Fluid. The small amount of Hydraulic Fluid in the Pump generally does not need to be changed or added to. If you think your Lift has dirty or low Hydraulic Fluid, visit www.bendpak.com/support/ or call BendPak Ranger at (805) 933-9970. RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 23: Troubleshooting

    Platform, take the Lift out of service, determine the source of the problem, resolve the problem yourself, or visit www.bendpak.com/support/, email support@bendpak.com, or call BendPak Ranger at (805) 933-9970. Do not put the Lift back into service until the issue has been resolved.

  • Page 24: Labels

    Labels RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 25: Parts Drawings

    M20 A120 Bolt, Nylon Nut, and Washer Tire Bearing 2020 Link Rod 2 Ball Handle M16 A70 Bolt, Nut, and Washer M16 A370 Bolt and Washer Shoulder Right RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 26 M8 25 Bolt and Nut M8 60 Bolt, Nut, and Washer Release Handle Copper Ring M6 Bolt Cable Link Plate Release Cable Guide Ring Spring M12 12 Bolt RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...

  • Page 27: Maintenance Log

    Maintenance Log RML-1500XL ATV / Motorcycle Lift P/N 5900183 — Rev. E — Feb. 2020...
  • Page 28 1645 Lemonwood Drive Santa Paula, CA 93060 USA © 2020 BendPak Inc. All rights reserved. bendpak.com...

Table of Contents