Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATION MANUAL
1-1/2 TON TRANSMISSION JACK
Model: RTJ-3000
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes
to the purchaser upon receipt from the carrier.
Consequently, claims for the material damaged in
shipment must be made by the purchaser against the
transportation company at the time shipment is
received.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS
DOCUMENT. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
BE SAFE
Ranger™ Transmission Jacks are designed and
built with safety in mind. However, proper training
and thoughtful operation on the part of the operator
can increase your overall safety. DO NOT operate
or repair this equipment without reading this manual
and the important safety instructions shown inside.
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read it.
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Tel: 1-805-933-9970
Toll Free: 1-800-253-2363
Fax: 1-805-933-9160
www.rangerproducts.com
REV D 03-29-16
P/N 5900745
Advertisement
Table of Contents
Related Manuals for Ranger RTJ-3000
Summary of Contents for Ranger RTJ-3000
- Page 1 SHIPPING DAMAGE CLAIMS BE SAFE When this equipment is shipped, title passes Ranger™ Transmission Jacks are designed and to the purchaser upon receipt from the carrier. built with safety in mind. However, proper training Consequently, claims for the material damaged in...
-
Page 2: Warranty Policy
Returned items with cosmetic defects that do not interfere with product functionality. Defective parts replaced at no charge must be returned to your dealer or Ranger Products™ within 60 days of • Returned items with no accompanying RMA number the date that the replacement parts are shipped;... -
Page 3: Important Safety Tips
• DO NOT modify the jack or use adapters unless Any product that appears to be damaged in any way, approved or supplied by Ranger. is found to be worn or operated abnormally, must be • Use only anti-wear hydraulic jack oil with a 215 sus removed from service immediately. -
Page 4: Setup Instructions
RESTRAINT SYSTEM. IT IS YOUR RESPONSIBILITY TO ADJUST THE RESTRAINT SYSTEM TO A KEEP HANDS AND BODY CLEAR OF ALL PINCH SUITABLE POSITION. BENDPAK / RANGER IS NOT POINTS. READ AND UNDERSTAND THIS MANUAL SUBJECT TO ANY RESPONSIBILITY FOR BEFORE OPERATING THE TRANSMISSION JACK. -
Page 5: Maintenance
OPERATING INSTRUCTIONS 2. Regularly check the oil level. With the saddle fully lowered, remove the breather screw, and check the oil level. The oil level should be at the bottom of the 1. Follow the vehicle’s recommended service procedure filler screw holes. Add oil if necessary. for removal of the component. - Page 6 RTJ-3000 PARTS BREAKDOWN...
- Page 7 RTJ-3000 PARTS LIST 4. Main construction PART NO DESCRIPTION PART NO DESCRIPTION Bolt Steel ball Washer Spring Washer Head frame accessories Bolt Head Release pedal seat Bolt Seal Steel pin Seal Cotter pin Small top cap Release pedal Seal Locking block...