Table of Contents
Advertisement
Pressure sensitive safety edges
Pressure sensitive safety edges on the drum edges. These stop the rotation if compressed. When
the obstacle is removed, the rotation continues.
Force sensitive door leaves
If the system detects an obstacle blocking the door, the motor is de-energized.
The door makes three attempts to start with two seconds pause between each attempt and
then waits another 30 seconds before a final attempt is made.
If the obstacle is cleared and the door pushed forward during the waiting period, operation is
resumed. In case the blocking persists, E30 is shown on the PCD and the door remains stationary.
To resume operation after the obstacle has been removed, the error can be cleared by pushing
the door forward or pressing C on the PCD.
Emergency stop button
The door rotation can be stopped by pressing the emergency stop button.
To reset the door to normal operation - release the emergency stop button by rotating it in the
direction of the arrows and press C on the PCD.
1003090-en-12.0
ILL-00048
PCD
FU NC
E
2 0
DA TA
3
2
1
6
5
4
9
8
7
+
0
↑
–
#
↓
C
C
S
F
0 1
Issue 2020-10-09
ILL-02092
17
Advertisement
Table of Contents
