Access code
To be able to operate the PCD it is required to login with an access code.
Login on the PCD
1
Press # to clear the display.
2
Enter the access code 1234. The display shows ==.
3
Press # to confirm the input.
If the access code is correct the display shows
LI (Login)
0 1 (Level 01)
In case of four consecutive failed login attempts, five minutes must pass before a new attempt can
be made.
Logout from the PCD
1
Press # to clear the display.
2
Enter the access code. The display shows ==.
3
Press # to confirm the input.
If the access code is correct the display shows
LO (Logout)
0 1 (Level 01)
4
Automatic logout ten minutes after the last key press.
5
Automatic logout can be inhibited by typing F561 on the PCD.
Change access code
At delivery the access code is 1234. To change, follow the procedure below.
1
Type #1234 #. If the access code is correct the display shows
LI (Login)
0 1 (Level 01)
2
Type F41. The display shows
F 4
L 1
3
Enter new code (4 digits).
4
Press S to confirm.
5
Enter the new access code a second time.
6
Press S to confirm.
10
Issue 2020-10-09
1003090-en-12.0