Table of Contents
Advertisement
Options
Even though the ASSA ABLOY RD3 and ASSA ABLOY RD4 are installed to comply with all applicable
safety regulations, it is possible to enhance safety/comfort with the following add-ons (please contact
your local ASSA ABLOY Entrance Systems company for detailed description).
Break-out function
This function enables the door leaves to be broken outwards in case of emergency.
The break-out function can be connected to the fire alarm system. The function can also be activated
with an emergency opening button.
Note! If the door is equipped with the break-out solution, this must be tested minimum once a year.
Local regulations needs to be followed.
Reset after the break-out function has been used:
If the escape doors have been opened, the display shows S37 or C3.
To make it possible to close the escape doors, do the following:
1
Release the emergency opening button by turning it in the direction of the arrows.
2
Close the door leaves correctly and press C on the PCD.
Emergency opening button
Activates the break-out system.
1003090-en-12.0
Issue 2020-10-09
PCD
S
FU NC
C 3
DA TA
3
2
1
6
5
4
9
8
7
+
↑
0
C
–
↓
#
C
S
F
0 1
ILL-02056
27
Advertisement
Table of Contents
