Panasonic PT-40LC12 Service Manual page 45

HOW TO CHECK THE REAR JACK C.B.A.
1. Remove the Rear Cover. Refer to Step 1 in HOW TO
REMOVE THE TV MAIN C.B.A. AND THE REAR JACK
C.B.A.
Note:
In this position, it is possible to check the TPs (TP3801,
TP3802, TP3803, TP5003, TP5004, TP5005) and
Connectors (P3801, P5003) on the upper portion of the
Rear Jack Panel.
Rear Jack C.B.A.
P3801
TP3801 TP3802 TP3803
Rear Jack Panel
2. Remove the Rear Jack Panel from the Rear Jack C.B.A.
To do this, remove the AV Front Door, the Front Cover L
Unit, the Front Cover R Unit, the Center Panel Unit, the
Lamp Cover and the Base Front Panel Unit in order. Refer
to steps 2~12 in HOW TO REMOVE THE TV MAIN C.B.A.
AND THE REAR JACK C.B.A.
3. Install the TV Frame into the unit.
Slide to install
TV Frame
4. Reconnect Connector cables to Connectors P1007, P1010
and P4504 on the TV Main C.B.A.
TP5005 TP5004 TP5003
Fig. 10-1
Fig. 10-2
5. Reconnect Connector cables to Connectors P2501, P2701,
P2305 on the LCD Main C.B.A.
6. Reconnect Connector cables to Connector P804 on the TV
Main C.B.A.
Reconnect Connector cables to Connector P1101 on the
Audio Power C.B.A.
<Checking position for the Rear Jack C.B.A.>
P5003
Rear Jack C.B.A.
Fig. 10-3