Panasonic PT-47X54J Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. PT47X54J - 47" PROJECTION TV
  6. Service manual
Panasonic PT-47X54J Service Manual

Panasonic PT-47X54J Service Manual

Hdtv monitor
Hide thumbs Also See for PT-47X54J:
Table of Contents

Advertisement

Quick Links

MTNC040522A1
B19
HDTV MONITOR
PT-47X54J / PT-53TW54J
GN1P
This simplified service manual is issued to add listed model to the
main service manual order No. MTNC040520C1(PT-53X54J). A parts
list and schematics are included in this simplified service manual.
Please file and use this simplified service manualtogether with the
main service manual order No. MTNC040520C1(PT-53X54J).

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PT-47X54J

Summary of Contents for Panasonic PT-47X54J

  • Page 1 MTNC040522A1 HDTV MONITOR PT-47X54J / PT-53TW54J GN1P This simplified service manual is issued to add listed model to the main service manual order No. MTNC040520C1(PT-53X54J). A parts list and schematics are included in this simplified service manual. Please file and use this simplified service manualtogether with the...
  • Page 2 1. Safety precautions General guidelines An isolation transformer should always be used during the servicing of a receiver whose chassis is not isolated from AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injuryfrom electrical shocks. It will also protect the receiver from being damaged by accidental shorting that may occur during servicing.
  • Page 3 terminals, control shafts, etc. If the exposed metallic part has a returnpath to the chassis, the reading should be between 240k and 5.2M . If the exposed metallic part does not have a return path to the chassis, the reading should be infinite. Leakage current hot check Plug the AC cord directly into the AC outlet.
  • Page 4 measures 30.1 ± 1.5kV. Apply HD 1080i white pattern and confirm the high voltage measures 30.1 ± 1.5kV. 2. About lead free solder (PbF) NOTE Lead is listed as (Pb) in the periodic table of elements. / In the information below, Pb will refer to lead solder, and PbF will refer to Lead Free Solder.
  • Page 5 Suggested Pb free solder There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also beused. 3. Important safety tests Measuring H.V. The anode caps are cemented to the CRTs.
  • Page 6 Note: Reinsert the anode lead into the FBT distributor until it is tightly and fully seated. Turn the locking cap clockwise to lock in place. (EHT) Protector operation check With the cabinet back removed, apply a nominal 120V A.C. to the PTV. Over voltage test Preparation: 1.
  • Page 7 2. Turn PTV ON. 3. Adjust the picture or brightness controls so that the DVM reads 12.7 ± 0.4 volts. 4. Increase the variable power supply until set turns off. The set should turn off at 12.7 ± 0.4 volts (DVM) and high voltage less than 36.4kV.
  • Page 8 2. Without pulling up, carefully twist the component with tweezers to break the adhesive. 3. Do not reuse removed leadless or chip components since they are subject to stress fracture during removal. Chip component installation 1. Put a small amount of solder on the board soldering pads. 2.
  • Page 9 3. Remove the solder from all the pads of the Flat IC by using a de solder braid 4. Position the new Flat IC in place (apply the pins of the Flat IC to the soldering pads where the pins need to be soldered). Properly determine the positions of the soldering pads and pins by correctly aligning the polarity symbol 5.
  • Page 10 IMPORTANT To protect against possible damage to the solid state devices due to arcing or static discharge, make certain that all ground wires are securely connected CAUTION The power supply circuit is above earth ground and the chassis cannot be polarized. Use an isolation transformer when servicing the receiver to avoid damage to the test equipment or to the chassis.
  • Page 12 6. Receiver feature table FEATURE/MODEL PT-47X54J PT-53TW54J CHASSIS AP832 BP832 MICRO 256K MENU LANGUAGE ENGLISH / SPANISH / FRENCH CLOSED CAPTION V-CHIP (USA/CANADA) CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT...
  • Page 13 AUDIO OUT (FAO: F, VAO:V) COMPONENT INPUT (Y, Pb, Pr) S-VIDEO INPUT (REAR/FRONT) HDMI/HDCP INPUT Note: Specifications are subject to change without notice or obligation. 7. Board description table Board Description for PT-47X54J models. BOARD PART NUMBER DESCRIPTION A-BOARD TNP2AH058 MAIN CHASSIS...
  • Page 14 BOARD PART NUMBER DESCRIPTION A-BOARD TNP2AH058AC MAIN CHASSIS D-BOARD TNP2AH059 POWER SUPPLY CD-BOARD TNP2AA166 AUTO CONVERGENCE SENSOR * DC-BOARD TNP2AA163 CONVERGENCE PROCESSING * DG-BOARD TNP2AA173AE MPU, VIDEO SIGNAL PROCESSING G-BOARD TNP2AA158 FRONT A/V INPUT H-BOARD TNP2AA174AF REAR A/V INPUTS K-BOARD TNP2AA159 KEYBOARD PANEL LB-BOARD...
  • Page 15 This PTV has a feature that allows to clone convergence from main EEPROM data adjustments from a PTV to other by connecting a jig to the PTV set, or can be used to back-up data before making adjustments. A jig part number TXFJIG01SER, is availablethrough Matsushita/Panasonic Services.
  • Page 16 mode section). 2. Select “AREA” DAC and then press ACTION button on remote to enter. Press VOL right/left to select one of the following options then press ACTION: - Select ALL to copy all main EEPROM data - Select ADJ to copy only adjustment data. - Select FIX to copy only fix data 3.
  • Page 17 9. Remove the copy jig from A15. EEPROM copy jig connection 10. Disassembly for service PT-47X54J models. NOTE: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service.
  • Page 18 Front cover replacement 1. Remove the speaker grille. 2. Remove the cabinet front board by removing the 2 screws in the middle section. 3. Remove the screws from the middle section (4) of the front panel and both side panels (3 in each side from the back, see picture). 4.
  • Page 19 Screen frame removal (back view) 4. Tilt the assembly forward while lifting it out of place. CAUTION: At this point the keyboard, A/V inputs and convergence sensors, must be disconnected from K-board and G-board, otherwise the cables and connectors could get damaged. Screen assembly 1.
  • Page 20 6. Carefuly lift screen frame leaving the screen frame cover with the 3 screens (Fresnel, Lenticular, Protective) on top of it. Keyboard and front A/V inputs removal 1. Unplug the connectors from keyboard and front A/V inputs assemblies. Remove the screws affixing the keyboard (4 screws) and front A/V inputs (3 screws) and tilt the A/V panel assembly upward and release it fromthe screen frame.
  • Page 21 Main chassis block 1. After removing the screen frame and front cover, remove the side panel from each side (each side panel is fastened by 7 screws, 4 at front and 3 in the back). 2. Remove the 2 screws from the cabinet body that holds the upper cabinet cover and carefully remove it.
  • Page 22 Mirror removal The mirror is attached inside the cabinet cover. Carefully remove the cabinet cover to access its interior surface and remove the screws securing the brackets that hold the mirror at the top and sides to the mirror. Mirror Removal (Inside View) 10.1.
  • Page 23 A/V BACK COVER ASSEMBLY This assembly is secured to H-Board by 8 screws. H-Board 1. H-Board is connected to DG-board with H1 connector. 2. Pull carefully to the right to disconnect. DG-Board 1. Plugs onto A-Board at A13 and A14 connectors (DG3 and DG4 respectively).
  • Page 24 Some tie wraps that secure the wire dressings may need to be unfastened for chassis removal. 3. Remove plug connector in A6 that goes to G-Board (G1). 4. Remove plug connectors in A7, A8 that goes to K-board (K1) and R -board (R1).
  • Page 25 10.2. Dissasembly for service PT-53TW54J NOTE: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service. Speaker grille removal Speaker grille, is secured to the cabinet of the PTV with 6 rubber holders.
  • Page 26 Back lower cover removal 1. Remove (7) hex screws around the perimeter, marked with arrows. See figure for screws location. 2. Remove (9) screws from around the A/V terminal board (marked with arrows). Back lower cabinet removal Back cabinet removal 1.
  • Page 27 1. Disconnect the cables leading to the keyboard, A/V inputs and autoconvergence sensors. 2. At this point the front cover is held only by four screws, be careful not to push the cabinet forward. 3. Remove screws and tilt the assembly forward while lifting it out of place.
  • Page 28 1. Remove the screen frame. See screen frame removal procedure. 2. Place screen frame face down on a soft surface. 3. Remove all screen brackets and corner brackets Note: The brackets are painted black (permanent marker) on the edge to prevent reflection on image. 4.
  • Page 29 2. The main chassis block is secured to the cabinet by 2 screws at front, behind the Speaker Grill and 3 screws inside on the bottom of the optical frame). 3. Remove the horizontal barrier panel at the back of the cabinet. 4.
  • Page 30 3. Remove the defective CRT anode lead from the high voltage distributor block that is mounted on the flyback transformer. Discharge to CRT chassis. 4. Unplug connectors from D-Board. See board layout. D14 for red, D15 for green and D16 for blue. 5.
  • Page 31 other wires from holders. 9. Loosen a screw that secures the DY and remove it from the CRT neck. Caution: To insure protection against x-ray radiation, the lens must be mounted in place at all times when power is applied to the PTV CRT replacement 1.
  • Page 32 Note: Please assemble with screws in the order shown and tighten with the same torque. 10.4. PT-53TW54J screen assemblies Screen assemblies 10.5. Screen assemblies warning When storing or disposing of screen assemblies, be sure not to place them in direct sunlight. These screens may act as a magnifying glass and could cause a fire.
  • Page 33 - 47”: 1037mm horizontal x 83.43mm vertical. - 53”: 1173.3mm horizontal x 660mm vertical. Single grid dimension: SCREEN HORIZONTAL VERTICAL SIZE 47” 167.83mm 83.43mm 53” 189.22 mm 94.29 mm NOTE: A convergence alignment template, part number TXFQD01JSER is available through Matsushita/ Panasonic Services Convergence template.
  • Page 34 11. Reference of PDF links color 12. Conductor views 12.1. Printed Circuit Board - A (page 1 of 2) 12.2. Printed Circuit Board - A (page 2 of 2) 12.3. Printed Circuit Boards - G & K 13. Schematic diagrams...
  • Page 35 13.1. Schematic diagrams notes...
  • Page 37 13.2. Notas de los diagramas esquem á ticos...
  • Page 39 13.3. A-Board schematic (1 of 3) 13.4. A-Board schematic (2 of 3) 13.5. A-Board schematic (3 of 3) 13.6. G & K Boards schematics 14. Parts location PT-53TW54J *For PT-47X54J parts location, refer to Main service manual order No.MTNC040520C1 PT-53TW54J parts location.
  • Page 40 15. Parts list 15.1. Description of abbreviations guide...
  • Page 41 15.2. Parts list Ref. No. Part No. Part Name & Description Remarks CAPACITORS C001 ECA1HM4R7B CAP E 4.7UF-50V C003 ECJ2VC1H101J CAP C 100PF-J-50V C004 ECJ2VF1E224Z CAP C .22UF-Z-25V C006 EEUFC1A471B CAP E 470UF-10V C007 ECA1HM4R7B CAP E 4.7UF-50V C009 ECJ2VC1H101J CAP C 100PF-J-50V C010 ECJ2VF1E224Z...
  • Page 42 Ref. No. Part No. Part Name & Description Remarks C332 ECKR1H103ZF5 CAP C .01UF-Z-50V C333 ECA1HM470B CAP E 47UF-50V C334 ECA2EM470B CAP E 47UF-250V C335 ECCR1H221JC5 CAP C 220PF-J-50V C336 ECA1HM470B CAP E 47UF-50V C337 ECKR1H103ZF5 CAP C .01UF-Z-50V C339 ECQE2104KFW CAP P .10UF-K-200V C340...
  • Page 43 Ref. No. Part No. Part Name & Description Remarks C533 ECKR2H101KB5 CAP C 100UF-K-500V C535 ECA1EM471E CAP E 470UF-25V C601 EEUFC1C331B CAP E 330UF-16V C602 ECJ2VF1H103Z CAP C .01UF-Z-50V C653 ECA1HM010E CAP E 1UF-50V C654 ECA1HM010E CAP E 1UF-50V C701 ECA1CM101B CAP E 100UF-16V C702...
  • Page 44 CAP C .1UF-Z-50V C856 ECJ2VF1H103Z CAP C .01UF-Z-50V C860 ECJ2VB1H103K CAP C .01UF-K-50V C861 ECJ2VF1H103Z CAP C .01UF-Z-50V C862 ECJ2VB1H103K CAP C .01UF-K-50V / PT-47X54J C863 ECJ2VF1H103Z CAP C .01UF-Z-50V C864 ECJ2VF1H103Z CAP C .01UF-Z-50V C865 ECA1CM221B CAP E 10UF-16V C866 ECA0JM221B CAP E 220UF-6.3V...
  • Page 45 CAP E 100UF-16V C2215 ECJ2VF1H104Z CAP C .1UF-Z-50V C2216 ECJ2VF1H104Z CAP C .1UF-Z-50V C2303 ECA50YT1R5KB CAP E 1.5UF-50V / PT-47X54J C2303 ECA50YT2R2KB CAP E 2.2UF-50V / PT-53TW54J C2306 ECA50YT1R5KB CAP E 1.5UF-50V / PT-47X54J C2306 ECA50YT2R2KB CAP E 2.2UF-50V / PT-53TW54J...
  • Page 46 CAP C 470PF-K-50V C2332 ECJ2VF1C474Z CAP C .47UF-Z-16V / PT-53TW54J C2333 ECJ2VB1H331K CAP C 330PF-K-50V / PT-53TW54J C2334 ECJ2VF1C105Z CAP C 1.0UF-Z-16V / PT-47X54J C2334 ECJ2VF1C474Z CAP C .47UF-Z-16V / PT-53TW54J C2335 ECJ2VF1C105Z CAP C 1.0UF-Z-16V / PT-47X54J C2336 ECJ2VB1H102K CAP C .001UF-K-50V / PT-53TW54J...
  • Page 47 CAP C 1.0UF-Z-16V C2378 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2379 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2381 ECEA1HN010UB CAP E 1UF-50V / PT-47X54J C2381 ECJ2VB1H561K CAP C 560PF-K-50V / PT-47X54J C2382 ECJ2VB1H561K CAP C 560PF-K-50V / PT-47X54J C2383 ECEA1HN010UB CAP E 1UF-50V / PT-47X54J...
  • Page 48 Ref. No. Part No. Part Name & Description Remarks C3345 ECJ2VB1H152K CAP C .0015UF-K-50V C3346 ECJ2VB1H103K CAP C .01UF-K-50V C3347 ECJ2YB1A105K CAP C 1.0UF-K-125V C3348 ECJ2YB1A105K CAP C 1.0UF-K-125V C3349 ECJ2VB1H152K CAP C .0015UF-K-50V C3350 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3351 ECJ2VB1H152K CAP C .0015UF-K-50V C3352...
  • Page 49 Ref. No. Part No. Part Name & Description Remarks D304 MA2C165001VT DIODE D306 MA2C165001VT DIODE D307 MA2C165001VT DIODE D312 MA2C18800E DIODE D313 MA2C18800E DIODE D314 MA2C18800E DIODE D315 MA2C18800E DIODE D331 B0HALP000002 DIODE FAST RECOVERY D331 MA2C165001VT DIODE D334 MA2C165001VT DIODE D335 MA2C165001VT...
  • Page 50 D656 MAZ41100MF DIODE ZENER...
  • Page 51 DIODE ZENER D702 B0HALP000002 DIODE FAST RECOVERY D801 D3SB80-4101 DIODE D802 D4EAB3610002 DIODE D804 B0EBKM000016 DIODE / PT-53TW54J D804 B0EBKM000016 DIODE RECTIFIER / PT-47X54J D815 MA2C165001VT DIODE D816 MA2C70000F DIODE D817 AU01ZV0 DIODE D818 MAZ32700LL DIODE ZENER D819 B0BA01000046 DIODE VOLTAGE REGULATION...
  • Page 52 D2306 MA3X152K0L DIODE D2307 MA3X152K0L DIODE D2310 MA2C165001VT DIODE / PT-53TW54J D2311 MA2C165001VT DIODE / PT-53TW54J D2330 MA3X152K0L DIODE / PT-47X54J D2331 MA3X152K0L DIODE / PT-47X54J D2334 MA2C165001VT DIODE / PT-47X54J D3301 MAZ31100ML DIODE ZENER D3302 MAZ31100ML DIODE ZENER D3304...
  • Page 53 IC872 C0DACMG00001 9V REGULATOR...
  • Page 54 AUDIO AMPLIFIER IC2302 C1AA00000645 AUDIO AMPLIFIER / PT-53TW54J VAO OPERATIONAL AMPLIFIER IC2303 C0ABBA000073 IC2401 C1BB00000772 BBE VIVA PROCESSOR / PT-53TW54J IC2401 NJW1164MPTE1 BBE PROCESSOR / PT-47X54J IC7001 C5AA00000196 CONVERGENCE AMPLIFIER IC7002 C5AA00000196 CONVERGENCE AMPLIFIER COILS L001 ELELN330JA COIL PEAKING 33UH L002...
  • Page 55 ELC12E390L COIL CHOKE 39UH / PT-53TW54J L2313 EXCELDR35V FERRITE BEAD / PT-53TW54J L2314 EXCELDR35V FERRITE BEAD L2315 ELC12E390L COIL CHOKE 39UH L2316 ELC12E390L COIL CHOKE 39UH / PT-53TW54J L2317 TALL08T330KA COIL L2318 TALL08T330KA COIL L2354 EXCELSA35T FERRITE BEAD / PT-47X54J...
  • Page 56 Ref. No. Part No. Part Name & Description Remarks L2355 EXCELSA35T FERRITE BEAD / PT-47X54J L7001 EXCELSA39V FERRITE BEAD L7002 EXCELSA39V FERRITE BEAD L7003 EXCELSA39V FERRITE BEAD L7004 EXCELSA39V FERRITE BEAD L7005 EXCELSA39V FERRITE BEAD L7006 EXCELSA39V FERRITE BEAD LF801...
  • Page 57 Q2305 UN2115TX TRANSISTOR Q2306 UNR221600L TRANSISTOR Q2307 UNR221600L TRANSISTOR Q2308 2PD601AR-115 TRANSISTOR Q2309 2PD601AR-115 TRANSISTOR Q2350 UNR221600L TRANSISTOR / PT-47X54J Q2352 2PB709AR-115 TRANSISTOR / PT-47X54J Q2358 UNR221600L TRANSISTOR / PT-47X54J Q2451 2PD601AR-115 TRANSISTOR Q2452 2PD601AR-115 TRANSISTOR Q7006 2PD601AR-115 TRANSISTOR Q7007...
  • Page 58 ERDS2TJ681T RES C 680-J-1/4W R087 ERDS2TJ331T RES C 330-J-1/4W R088 ERDS2TJ123T RES C 12K-J-1/4W / PT-53TW54J R088 ERDS2TJ392T RES C 3.9K-J-1/4W / PT-47X54J R089 ERDS2TJ822T RES C 8.2K-J-1/4W / PT-47X54J R301 ERDS1FJ394P RES C 390K-J-1/2W R302 ERDS2TJ101T RES C 100-J-1/4W...
  • Page 59 Ref. No. Part No. Part Name & Description Remarks R338 ERDS2TJ681T RES C 680-J-1/4W R341 ERDS2TJ101T RES C 100-J-1/4W R344 ERG7ZJ272 RES M 2.7K-J-7W R345 ERDS2TJ470T RES C 47-J-1/4W R346 ERDS2TJ470T RES C 47-J-1/4W R348 ERDS2TJ563T RES C 56K-J-1/4W R349 ERDS2TJ821T RES C 820-J-1/4W R350...
  • Page 60 Ref. No. Part No. Part Name & Description Remarks R421 ERJ6ENF2702V RES M 27K-F-1/10W R422 ERJ6ENF82R0V RES M 82-F-1/10W R423 ERJ6ENF5601V RES M 5.6K-F-1/10W R425 ERDS1FJ1R0T RES C 1.0-J-1/2W R426 ERJ6ENF1502V RES M 15K-F-1/10W R428 ERJ6ENF1502V RES M 15K-F-1/10W R434 ERX12SJ1R8V RES M 1.8-J-1/2W R435...
  • Page 62 RES M 100K-J-1/10W R871 ERDS2TJ272T RES C 2.7K-J-1/4W R872 ERJ6GEYJ333V RES M 33K-J-1/10W R873 ERJ6GEYJ102V RES M 1K-J-1/10W R874 ERJ6GEYJ102V RES M 1K-J-1/10W / PT-47X54J R874 ERJ6GEYJ332V RES M 3.3K-J-1/10W R875 ERJ6ENF6191V RES M 6190-F-1/10W R876 ERJ6ENF33R0V RES M 33.OK-F-1/10W R877 ERJ6ENF1781V RES M 1.78K-F-1/10W...
  • Page 63 R907 ERDS1FVJ470T RES C 47-J-1/2W...
  • Page 64 Ref. No. Part No. Part Name & Description Remarks R908 ERDS1FVJ470T RES C 47-J-1/2W R909 ERDS1FVJ4R7T RES C 4.7-J-1/2W R910 ERDS2TJ4R7T RES C 4.7-J-1/4W R911 ERG3SJS221H RES M 220-J-3W R912 ERDS2TJ101T RES C 100-J-1/4W R913 ERDS2TJ152T RES C 1.5K-J-1/4W R914 ERDS2TJ152T RES C 1.5K-J-1/4W R915...
  • Page 65 Ref. No. Part No. Part Name & Description Remarks R977 ERDS2TJ151T RES C 150-J-1/4W R978 ERQ14AJ220P RES F 22-J-1/4W R979 ERDS2TJ472T RES C 4.7K-J-1/4W R980 ERDS2TJ472T RES C 4.7K-J-1/4W R981 ERDS2TJ681T RES C 680-J-1/4W R1322 ERJ6GEYJ101V RES M 100-J-1/10W R1323 ERJ6GEYJ101V RES M 100-J-1/10W R1324...
  • Page 66 Remarks R2306 ERJ12YJ101U RES M 100-J-1/2W / PT-53TW54J R2307 ERJ6ENF1001V RES M 1K-F-1/10W / PT-53TW54J R2307 ERJ6ENF1501V RES M 1.5K-F-1/10W / PT-47X54J R2308 ERJ6ENF5362V RES M 53.6K-F-1/10W PT-53TW54J R2309 ERJ12YJ101U RES M 100-J-1/2W R2310 ERJ6ENF5232V RES M 5.32K-F-1/10W / PT-47X54J...
  • Page 67 RES M 47K-J-1/10W R2366 ERJ6GEYJ102V RES M 1K-J-1/10W R2367 ERJ6GEYJ102V RES M 1K-J-1/10W R2378 ERJ6ENF1501V RES M 1.5K-F-1/10W / PT-47X54J R2380 ERJ6GEYJ392V RES M 3.9K-J-1/10W / PT-47X54J R2391 ERJ6GEYJ392V RES M 3.9K-J-1/10W / PT-47X54J R2420 ERJ6GEYJ392V RES M 3.9K-J-1/10W / PT-47X54J...
  • Page 68 Ref. No. Part No. Part Name & Description Remarks R3322 ERJ6GEYJ184V RES M 180K-J-1/10W R3323 ERJ6ENF75R0V RES M 75.0-F-1/10W R3324 ERJ6GEYJ184V RES M 180K-J-1/10W R3326 ERJ6GEYJ184V RES M 180K-J-1/10W R3327 ERJ6GEYJ184V RES M 180K-J-1/10W R3328 ERJ6GEYJ184V RES M 180K-J-1/10W R7001 ERG2FJ820H RES M 82-J-2W R7002...
  • Page 69 TMW2AX0041B MIRROR BRACKET (SIDE) TMW2AX0161 MIRROR BRACKET (TOP) M005 TKE2AA01002S SCREEN FRAME / PT-47X54J M006 TKP2AA1142S SCREEN FRAME COVER / PT-47X54J M007 TKG2AD00141 PROTECTIVE SCREEN 47” / PT-47X54J M008 TKG2AH50461 LENTICULAR SCREEN 47” / PT-47X54J M009 TKG2AH50681 SCREEN FRESNEL 47” / PT-47X54J...
  • Page 70 EASG16P559A2 SPEAKER (WOOFER) / PT-53TW54J EAST16P51A6 SPEAKER (WOOFER) / PT-47X54J TKP2AA1162S SPEAKER GRILLE / PT-47X54J TKP2AA0793S SPEAKER GRILLE / PT-53TW54J M012 TKP2AA1101S SPEAKER BASE COVER / PT-47X54J TLH2AH001 DISTRIBUTOR D9ZZ00000079 FOCUS PACK TXFKP08JSER A/V REAR COVER TKD2AX5011S FRONT BOARD PT-47X54J...
  • Page 71 A-PCB TNP2AH158 PAGE 1 OF 2 PT-53X54J...
  • Page 72 A-BOARD TNP2AH158 PAGE 2 OF 2 PT-53X54J...
  • Page 73 DG-BOARD 1 of 11 TNP2AA173AE PT-53X54J...
  • Page 74 DG-BOARD 2 of 11 TNP2AA173AE PT-53X54J...
  • Page 75 DG-BOARD 3 of 11 TNP2AA173AE PT-53X54J...
  • Page 76 DG-BOARD 4 of 11 TNP2AA173AE PT-53X54J...
  • Page 77 DG-BOARD 5 of 11 TNP2AA173AE PT-53X54J...
  • Page 78 DG-BOARD 6 of 11 TNP2AA173AE PT-53X54J...
  • Page 79 DG-BOARD 7 of 11 TNP2AA173AE PT-53X54J...
  • Page 80 DG-BOARD 8 of 11 TNP2AA173AE PT-53X54J...
  • Page 81 DG-BOARD 9 of 11 TNP2AA173AE PT-53X54J...
  • Page 82 DG-BOARD 10 of 11 TNP2AA173AE PT-53X54J...
  • Page 83 DG-BOARD 1 1 of 11 TNP2AA173AE PT-53X54J...
  • Page 84 DG-PCB BOTTOM VIEW TNP2AA173 PT-53X54J...
  • Page 85 DG-PCB TOP VIEW TNP2AA173 PT-53X54J...
  • Page 86 H-BOARD TNP2AA174AD PT-53X54J...
  • Page 87 H-PCB TNP2AA174 PT-53X54J...
  • Page 88 LB-BOARD 1 of 2 TNP2AA161 PT-53X54J...
  • Page 89 LB-BOARD 2 of 2 TNP2AA161 PT-53X54J...
  • Page 90 LB-PCB TNP2AA161 PT-53X54J...
  • Page 91 LG-BOARD 1 of 2 TNP2AA160 PT-53X54J...
  • Page 92 LG-BOARD 2 of 2 TNP2AA160 PT-53X54J...
  • Page 93 LG-PCB TNP2AA160 PT-53X54J...
  • Page 94 LR-BOARD 1 of 2 TNP2AA162 PT-53X54J...
  • Page 95 LR-BOARD 2 of 2 TNP2AA162 PT-53X54J...
  • Page 96 LR-PCB TNP2AA162 PT-53X54J...

  • Page 97: Table Of Contents

    MTNC040522A1 HDTV MONITOR PT-47X54J PT-53TW54J GN1P This simplified service manual is issued to add listed model to the main service manual order No. MTNC040520C1(PT-53X54J). A parts list and schematics are included in this simplified service manual. Please file and use this simplified service manual together with the main service manual order No.
  • Page 98 10 Disassembly for service PT-47X54J models. 13 Schematic diagrams 10.1. Chassis assembly 13.1. Schematic diagrams notes 10.2. Dissasembly for service PT-53TW54 J 13.2. Notas de los diagramas esquemáticos 10.3. Disassembly for CRT replacement 13.3. A-Board schematic (1 of 3) 10.4. PT-53TW54 J screen assemblies 13.4.

  • Page 99: Safety Precautions

    1 Safety precautions Connect a 1.5kΩ 10 watt resistor in parallel with a 0.15µF capacitor between an exposed metallic part and ground. Use earth ground, for example a water pipe. General guidelines Using a DVM with a 1000 ohms/volt sensitivity or higher, An isolation transformer should always be used during the measure the AC potential across the resistor.

  • Page 100: About Lead Free Solder (Pbf)

    2 About lead free solder (PbF) NOTE Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to lead solder, and PbF will refer to Lead Free Solder. The lead free solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 101: Important Safety Tests

    3 Important safety tests Measuring H.V. The anode caps are cemented to the CRTs. To gain access for high voltage measurement, remove the red CRT’s anode lead from the flyback transformer distributor. Grasp the anode lead protective cap at its bottom and squeeze it against the locking cap body inside, rotate 1/4 turn counter clockwise and pull the anode lead sleeve out of the FBT distributor.

  • Page 102: Service Notes

    4 Service notes NOTE using a desolder braid These components are affixed with glue. Be careful not to break or damage any foil under the component or at the pins of the ICs when removing. Usually applying heat to the component for a short time while twisting with tweezers will break the component loose.
  • Page 103 IMPORTANT To protect against possible damage to the solid state devices due to arcing or static discharge, make certain that all ground wires are securely connected CAUTION The power supply circuit is above earth ground and the chassis cannot polarized. isolation transformer when servicing the receiver to avoid damage to the test equipment or to the chassis.

  • Page 104: Ptv Location Of Controls

    5 PTV Location of controls...

  • Page 105: Receiver Feature Table

    6 Receiver feature table FEATURE/MODEL PT-47X54J PT-53TW54J CHASSIS AP832 BP832 MICRO 256K MENU LANGUAGE ENGLISH / SPANISH / FRENCH CLOSED CAPTION V-CHIP (USA/CANADA) CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT...

  • Page 106: Board Description Table

    7 Board description table Board Description for PT-47X54J models. BOARD PART NUMBER DESCRIPTION A-BOARD TNP2AH058 MAIN CHASSIS D-BOARD TNP2AH059 POWER SUPPLY CD-BOARD TNP2AA166 AUTO CONVERGENCE SENSOR * DC-BOARD TNP2AA163 CONVERGENCE PROCESSING * DG-BOARD TNP2AA173AE MPU, VIDEO SIGNAL PROCESSING G-BOARD TNP2AA164...

  • Page 107: Auto Diagnosis Feature

    8 Auto diagnosis feature These receivers incorporate a self diagnosis feature. With this feature it will be easier for the technician to detect failures. There is a LED located by the keyboard on the front panel, this LED will start flashing when SOS is detected by the circuits located in specific areas, depending on how many times the LED is flashing, this will indicate what circuit should be checked.

  • Page 108: Eeprom Copy Jig

    EEPROM data adjustments from a PTV to other by connecting a jig to the PTV set, or can be used to back-up data before making adjustments. A jig part number TXFJIG01SER, is available through Matsushita/Panasonic Services. Preparation: To connect this jig, remove the lower back cover as...

  • Page 109: Disassembly For Service Pt-47X54J Models

    10 Disassembly for service PT-47X54J models. NOTE: removing the last screws. Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service.
  • Page 110 2. Remove the 2 screws from the cabinet body that holds the upper cabinet cover and carefully remove it. Screen assembly (Inside view) 3. The main chassis block is secured to the main body 6. Carefuly lift screen frame leaving the screen frame cabinet by 4 screws on the top (see picture).

  • Page 111: Chassis Assembly

    3. Remove plug connector in A6 that goes to G-Board (G1). 4. Remove plug connectors in A7, A8 that goes to K-board (K1) and R-board (R1). D-Board 1. D-Board is secured to the chassis tray with five screws. 2. The D-Board is mated to A-Board by four connectors (female side of connectors): D1, D2, D3 &...

  • Page 112: Dissasembly For Service Pt-53Tw54 J

    10.2. Dissasembly for service PT- 2. Remove (9) screws from around the A/V terminal board (marked with arrows). 53TW54J NOTE: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service.

  • Page 113: Disassembly For Crt Replacement

    hookup terminal from damage). Main chassis block 1. Remove the back lower cabinet cover. 2. The main chassis block is secured to the cabinet by 2 screws at front, behind the Speaker Grill and 3 screws inside on the bottom of the optical frame). 3.
  • Page 114 4. Unplug connectors from D-Board. See board layout. D14 for red, D15 for green and D16 for blue. 5. Unplug the defective CRT black DAG ground connector from the CRT Board. 6. Remove the CRT Board from the defective CRT neck. 7.

  • Page 115: 53Tw54J Screen Assemblies

    10.4. PT-53TW54J screen assemblies Screen assemblies 10.5. Screen assemblies warning When storing or disposing of screen assemblies, be sure not to place them in direct sunlight. These screens may act as a magnifying glass and could cause a fire. 10.6. Convergence alignment The convergence alignment template is a grid approximately the size of the viewing screen used to ensure the proper size template...
  • Page 116 • • • • 47”: 1037mm horizontal x 83.43mm vertical. • • • • 53”: 1173.3mm horizontal x 660mm vertical. Single grid dimension: SCREEN SIZE HORIZONTAL VERTICAL 47” 167.83mm 83.43mm 53” 189.22 mm 94.29 mm NOTE: convergence alignment template, part number TXFQD01JSER is available through Matsushita/Panasonic Services Convergence template.

  • Page 117: Reference Of Pdf Links Color

    11 Reference of PDF links color...

  • Page 118: Conductor Views

    12 Conductor views...

  • Page 119: Printed Circuit Board - A (Page 1 Of 2)

    12.1. Printed Circuit Board - A (page 1 of 2) A-PCB TNP2AH158 PAGE 1 OF 2 PT-53X54J...

  • Page 120: Printed Circuit Board - A (Page 2 Of 2)

    12.2. Printed Circuit Board - A (page 2 of 2) A-BOARD TNP2AH158 PAGE 2 OF 2 PT-53X54J...

  • Page 121: Printed Circuit Boards - G & K

    12.3. Printed Circuit Boards - G & K G-PCB / K-PCB TNP2AA158 / TNP2AA159 PT-53TW54J...

  • Page 122: Schematic Diagrams

    13 Schematic diagrams 13.1. Schematic diagrams notes...

  • Page 123: Notas De Los Diagramas Esquemáticos

    13.2. Notas de los diagramas esquemáticos...

  • Page 124: A-Board Schematic (1 Of 3)

    13.3. A-Board schematic (1 of 3) A-BOARD 1 of 3 TNP2AH058AC PT-53TW54J...

  • Page 125: A-Board Schematic (2 Of 3)

    13.4. A-Board schematic (2 of 3) A-BOARD 2 of 3 TNP2AH058AC PT-53TW54J...

  • Page 126: A-Board Schematic (3 Of 3)

    13.5. A-Board schematic (3 of 3) A-BOARD 3 of 3 TNP2AH058AC PT-53TW54J...

  • Page 127: G & K Boards Schematics

    13.6. G & K Boards schematics G-BOARD / K-BOARD TNP2AA158 / TNP2AA159 PT-53TW54J...

  • Page 128: Parts Location Pt-53Tw54J

    14 Parts location PT-53TW54J *For PT-47X54J parts location, refer to Main service manual order No.MTNC040520C1 PT-53TW54J parts location.

  • Page 129: Parts List

    15 Parts list 15.1. Description of abbreviations guide...

  • Page 130: Parts List

    C509 ECWF2474JSR CAP P .47UF-J-200V C861 ECJ2VF1H103Z CAP C .01UF-Z-50V C510 ECJ2VC1H221J CAP C 220PF-J-50V C862 ECJ2VB1H103K CAP C .01UF-K-50V PT-47X54J C511 ECWH20222JVY CAP P 2200PF-J-2KV C863 ECJ2VF1H103Z CAP C .01UF-Z-50V C512 ECWH20202JVY CAP P 2000PF-J-2KV C864 ECJ2VF1H103Z CAP C .01UF-Z-50V...
  • Page 131 CAP C .1UF-Z-50V C876 ECA1VM221B CAP E 220UF-35V C2216 ECJ2VF1H104Z CAP C .1UF-Z-50V C877 ECJ2VF1H103Z CAP C .01UF-Z-50V C2303 ECA50YT1R5KB CAP E 1.5UF-50V PT-47X54J C878 ECJ2VF1H103Z CAP C .01UF-Z-50V C2303 ECA50YT2R2KB CAP E 2.2UF-50V C879 ECA0JM221B CAP E 220UF-6.3V PT-53TW54J C880 ECA0JM221B CAP E 220UF-6.3V...
  • Page 132 Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks C2349 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2461 ECJ2VF1C105Z CAP C 1.0UF-Z-16V PT-47X54J C2462 ECJ2VB1H332K CAP C .0033UF-K-50V C2350 ECJ2VB1H102K CAP C .001UF-K-50V C2463 ECJ2VB1H333K CAP C .033UF-K-50V PT-53TW54J C2464 ECJ2VB1H222K CAP C .0022UF-K-50V...
  • Page 133 Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks D082 MAZ40560MF DIODE ZENER D804 B0EBKM000016 DIODE RECTIFIER PT-47X54J D083 MAZ40560MF DIODE ZENER D815 MA2C165001VT DIODE TJSF17350 CONNECTOR D816 MA2C70000F DIODE TJSF17435 CONNECTOR D817...
  • Page 134 C1BB00000772 BBE VIVA PROCESSOR L933 EXCELSA35T FERRITE BEAD PT-53TW54J L934 EXCELSA35T FERRITE BEAD IC2401 NJW1164MPTE1 BBE PROCESSOR L935 EXCELSA35T FERRITE BEAD PT-47X54J L961 EXCELSA35T FERRITE BEAD IC7001 C5AA00000196 CONVERGENCE AMPLIFIER L962 EXCELSA35T FERRITE BEAD IC7002 C5AA00000196 CONVERGENCE AMPLIFIER L963 EXCELSA35T...
  • Page 135 UNR221600L TRANSISTOR Q353 2SC3942LB TRANSISTOR Q2308 2PD601AR-115 TRANSISTOR Q354 B1BAAN000025 TRANSISTOR Q2309 2PD601AR-115 TRANSISTOR Q355 B1BCAN000004 TRANSISTOR Q2350 UNR221600L TRANSISTOR PT-47X54J Q362 2SC3311ATA TRANSISTOR Q2352 2PB709AR-115 TRANSISTOR Q363 2SC3526H TRANSISTOR PT-47X54J Q364 2SA1309ATA TRANSISTOR Q2358 UNR221600L TRANSISTOR Q365 2SC3311ATA TRANSISTOR...
  • Page 136 Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R318 ERDS2TJ681T RES C 680-J-1/4W R422 ERJ6ENF82R0V RES M 82-F-1/10W R319 ERG12SJ101P RES M 100-J-1W R423 ERJ6ENF5601V RES M 5.6K-F-1/10W R320 ERDS1FJ330P RES C 33-J-1/2W R425 ERDS1FJ1R0T RES C 1.0-J-1/2W...
  • Page 137 R873 ERJ6GEYJ102V RES M 1K-J-1/10W R974 ERDS2TJ152T RES C 1.5K-J-1/4W R874 ERJ6GEYJ102V RES M 1K-J-1/10W R975 ERQ14AJ100P RES F 10-J-1/4W PT-47X54J R976 ERQ14AJ220P RES F 22-J-1/4W R874 ERJ6GEYJ332V RES M 3.3K-J-1/10W R977 ERDS2TJ151T RES C 150-J-1/4W R875 ERJ6ENF6191V RES M 6190-F-1/10W...
  • Page 138 R2352 ERJ6GEYJ332V RES M 3.3K-J-1/10W PT-53TW54J R2353 ERJ6GEYJ102V RES M 1K-J-1/10W R2307 ERJ6ENF1501V RES M 1.5K-F-1/10W R2354 ERJ6GEYJ392V RES M 3.9K-J-1/10W PT-47X54J R2356 ERJ6GEYJ183V RES M 18K-J-1/10W R2308 ERJ6ENF5362V 53.6K-F-1/10W R2357 ERJ6GEYJ332V RES M 3.3K-J-1/10W 53TW54J R2358 ERJ6GEYJ273V RES M 27K-J-1/10W...
  • Page 139 Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks R7012 ERX2FJ2R2H RES M 2.2-J-2W TKG2AF020-1 A/B LENS PT-47X54J R7013 ERX2FJ2R2H RES M 2.2-J-2W TKG2AF029 A/B LENS R7014 ERX2FJ2R2H RES M 2.2-J-2W PT-53TW54J R7015 ERX2FJ2R2H RES M 2.2-J-2W...
  • Page 140 Ref. Part No. Part Name & Description Remarks M017 TBX2AA0271 5-KEY BUTTON PT-47X54J TBX2AA2701 7-KEY BUTTON PT-53TW54J TKP2AA0801 LED PANEL PT-53TW54J TKP2AA1131 LED PANEL PT-47X54J M018 TKP2AA1361S SIDE RIGHT PANEL PT-47X54J M019 TKP2AA1362S SIDE LEFT PANEL PT-47X54J M020 TMM2AE10171 GROMMET SQUARE...
  • Page 143 A - BOARD - TNP2AH058 IC1302 IC872 IC2401 IC876 IC2201 ..0.00 ..19.40 ..4.40 ..8.90 ..19.40 ..1.60 .
  • Page 144 D - BOARD - TNP2AH059 IC1501 IC701 IC7001 IC811 IC801 ..10.80 ..0.20 ..0.00 ..19.30 ..19.50 ..1.40 .
  • Page 145 LG - BOARD - TNP2AA160 IC880 Q331 Q373 Q374 Q375 Q934 Q935 Q936 Q937 ..18.30 4.10 12.00 172.10 171.00 0.00 0.00 0.70 0.00 ..0.00 11.60 170.70 218.80 0.40 0.00 19.30 19.30 0.00 .
  • Page 146 A-Board TNP2AH058 2.04 Vp-p .292 Vp-p 1.08 Vp-p A4 PIN 1 (V-SAW) A4 PIN 4 (EHT ADJ) A14 PIN 13 (MAIN VIDEO) 3.56Vp-p 5.65 Vp-p 0.178 Vp-p A2 PIN 11 (SOS3 CONV) A2 PIN 3 (H-DRV) A2 PIN 5 (FBP) 3.36 Vp-p 3.36 Vp-p 0.176 Vp-p...
  • Page 147 D-Board TNP2AH059 1.56 kVp-p 12.6 Vp-p 0.65 Vp-p Q551-C IC701 PIN 3 Q551-B 13.4 Vp-p 2.28 Vp-p 3.60Vp-p IC701 PIN 7 D23 PIN 10 (DAF) IC701 PIN 6 2.04 Vp-p 2.02 Vp-p 1.44 Vp-p D22 PIN 3 (BH) D22 PIN 4 (GV) D22 PIN 2 BV 1.94 Vp-p 1.17 Vp-p...
  • Page 150 A-BOARD 1 of 3 TNP2AH058 PT-53X54J...
  • Page 151 A-BOARD 2 of 3 TNP2AH058 PT-53X54J...
  • Page 152 A-BOARD 3 of 3 TNP2AH058 PT-53X54J...
  • Page 153 A-PCB TNP2AH158 PAGE 1 OF 2 PT-53X54J...
  • Page 154 A-BOARD TNP2AH158 PAGE 2 OF 2 PT-53X54J...
  • Page 155 CD-BOARD / G-BOARD / K-BOARD / R-BOARD TNP2AA166 / TNP2AA164 / TNP2AA165 / TNPA0615AB PT-53X54J...
  • Page 156 CD-PCB / G-PCB / K-PCB / R-PCB TNP2AA166 / TNP2AA164 / TNP2AA165 / TNPA0615AB PT-53X54J...
  • Page 157 D-BOARD 1 of 5 TNP2AH059 PT-53X54J...
  • Page 158 D-BOARD 2 of 5 TNP2AH059 PT-53X54J...
  • Page 159 D-BOARD 3 of 5 TNP2AH059 PT-53X54J...
  • Page 160 D-BOARD 5 of 5 TNP2AH059 PT-53X54J...
  • Page 161 D-PCB PAGE 1 of 2 TNP2AH059 PT-53X54J...
  • Page 162 D-PCB PAGE 2 of 2 TNP2AH059 PT-53X54J...
  • Page 163 DC-BOARD 1 of 2 TNP2AA163 PT-53X54J...
  • Page 164 DC-BOARD 2 of 2 TNP2AA163 PT-53X54J...
  • Page 165 DC-PCB TOP & BOTTOM VIEW TNP2AA163 PT-53X54J...
  • Page 166 G-BOARD / K-BOARD TNP2AA158 / TNP2AA159 PT-53TW54J...
  • Page 167 G-PCB / K-PCB TNP2AA158 / TNP2AA159 PT-53TW54J...
  • Page 168 A-BOARD 1 of 3 TNP2AH058AC PT-53TW54J...
  • Page 169 A-BOARD 2 of 3 TNP2AH058AC PT-53TW54J...
  • Page 170 A-BOARD 3 of 3 TNP2AH058AC PT-53TW54J...
  • Page 171 MTNC040520C1 HDTV MONITOR PT-53X54J GN1P 1. Safety precautions General guidelines...
  • Page 172 An isolation transformer should always be used during the servicing of a receiver whose chassis is not isolated from AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injuryfrom electrical shocks. It will also protect the receiver from being damaged by accidental shorting that may occur during servicing.
  • Page 173 rechecked before it is returned to the customer. Hot check circuit Insulation test Connect an insulation tester between an exposed metallic part and A.C. line. Apply 1080VAC/ 60Hz for 1 second. Confirm that the current measurement is 0.5mA ~ 2.0mA. Repeat test with other metallic exposed parts.
  • Page 174 CAUTION - Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30 ~ 40 °C) higher. Please use a high temperature soldering iron and set it to 700 ± 20 °F (370 ±...
  • Page 175 3. Important safety tests Measuring H.V. The anode caps are cemented to the CRTs. To gain access for high voltage measurement, remove the red CRT’s anode lead from the flyback transformer distributor. Grasp the anode lead protective cap at its bottom and squeeze it against thelocking cap body inside, rotate 1/4 turn counter clockwise and pull the anode lead sleeve out of the FBT distributor.
  • Page 176 pin 1 on D-Board H.V. measurement 4. Connect a H.V. meter (static type, class 0.1) with high voltage leads to high voltage distributor on FBT. DVM and power supply connection 5. Connect the 15 ~ 25 V DC variable power supply positive lead to D34 or IC802 pin 2 (D Board) and negative lead to heat sink of Q551 or D825 Procedures:...
  • Page 177 4. Service notes NOTE These components are affixed with glue. Be careful not to break or damage any foil under the component or at the pins of the ICs when removing. Usually applying heat to the component for a short time while twisting with tweezers will break the component loose. Leadless chip component (surface mount) Chip components must be replaced with identical chips due to critical foil track spacing.
  • Page 178 with a 30 watt iron until solder flows. Do not apply heat for more than 3 seconds. How to replace flat ic (required tools) 1. Remove the solder from all of the pins of a Flat IC by using a desolder braid 2.
  • Page 179 4. Position the new Flat IC in place (apply the pins of the Flat IC to the soldering pads where the pins need to be soldered). Properly determine the positions of the soldering pads and pins by correctly aligning the polarity symbol 5.
  • Page 180 chassis. Connect the test equipment to the proper ground(HOT or COLD) when servicing, or incorrect voltages will be measured. WARNING This receiver has been designed to meet or exceed applicable safety and x-ray radiation protection as specified by government agencies and independent testing laboratories.
  • Page 182 6. Receiver feature table FEATURE/MODEL PT-53X54J CHASSIS AP832 MICRO 256K MENU LANGUAGE ENGLISH/SPANISH/FRENCH CLOSED CAPTION V-CHIP (USA/CANADA) CHANNEL INFO BANNER VIDEO INPUT SKIP SKIP CHANNEL COUNT CHANNEL COUNT PIP (1T), 2T PIP (2T), 2T SPLIT 2T SPLIT REMOTE CONTROL (W/LIGHT) EUR7603ZF0 CRT SUPPLIER MDDA (CENTAUR IV)
  • Page 183 FEATURE/MODEL PT-53X54J BASS/BALANCE/TREBLE CONTROL AI SOUND SURROUND SPATIALIZER/BBE A/V IN (REAR/FRONT) 4(3/1) A/V PROGRAM OUT AUDIO OUT (FAO: F, VAO:V) COMPONENT INPUT (Y, Pb, Pr) S-VIDEO INPUT (REAR/FRONT) HDMI/HDCP INPUT Note: Specifications are subject to change without notice or obligation. 7.
  • Page 184 8. Location of controls (EUR7603ZF0 remote) Note: For additional information for this remote please refer to the owner’s manual section remote operation, listed on the parts list section. 9. Auto diagnosis feature This receiver incorporates a self diagnosis feature. With this feature it will be easier for the technician to detect failures.
  • Page 185 This PTV has a feature that allows to clone convergence from main EEPROM data adjustments from a PTV to other by connecting a jig to the PTV set, or can be used to back-up data before making adjustments. A jig part number TXFJIG01SER, is availablethrough Matsushita/Panasonic Services.
  • Page 186 Procedure to copy convergence: 1. Enter to service mode and display service menu 2. Select “FINE” DAC and press ACTION on remote. 3. Press “8” on remote. 4. Select from and then press ACTION on remote: - INT to copy data from internal EEPROM to jig - EXT to copy from jig to internal EEPROM.
  • Page 187 11. A-Board check points...
  • Page 188 12. Chassis & boards layout (location of main components) Chassis and boards layout...
  • Page 189 Chassis and boards (FRONT)
  • Page 190 A-BOARD...
  • Page 191 D-BOARD...
  • Page 192 R-BOARD DC-BOARD (TOP)
  • Page 193 DC-BOARD (BOTTOM) G-BOARD...
  • Page 194 H-BOARD K-BOARD DG-BOARD (TOP)
  • Page 195 DG-BOARD (BOTTOM)
  • Page 196 13. Disassembly for service NOTE: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be reconnected using jumper leads, if necessary, before power is applied to PTV for service. Speaker grille removal Speaker grille, is secured to the cabinet of the PTV with 1 velcro dot and 2 screws at the bottom. Take the screws out and grip panel from the bottom, pull slightly backward and at the same time pull down to uncouple the 4 tabs.
  • Page 197 Front cover replacement 1. Remove the speaker grille. 2. Remove the cabinet front board by removing the 2 screws in the middle section. 3. Remove the screws from the middle section (4) of the front panel and both side panels (3 in each side from the back, see picture). 4.
  • Page 198 back of the speaker and order accordingly as different part numbers differ on PT-53X54J models. Also check part list whenordering. Part number Replace Description with EAST16P51A6 EAST16P51A6 Speaker Woofer EAST6PH08P6 E AST6PH08P6 S peaker Tweeter TAS2AA0027 TAS2AA0027 Speaker Woofer TAS2AA0022 TAS2AA0022 Speaker Tweeter Screen frame removal 1.
  • Page 199 At this point the keyboard, A/V inputs and convergence sensors, must be disconnected from K-board and G-board, otherwise the cables and connectors could get damaged. Screen assembly 1. Remove the screen frame. See screen frame removal procedure above. 2. Place screen frame face down on a soft surface. 3.
  • Page 200 upward and release it fromthe screen frame. Back panel removal 1. The back panel is fastened to the cabinet by 12 screws. See picture for screw location. Back panel removal Main chassis block 1. After removing the screen frame and front cover, remove the side panel from each side (each side panel is fastened by 7 screws, 4 at front and 3 in the back).
  • Page 201 2. Remove the 2 screws from the cabinet body that holds the upper cabinet cover and carefully remove it. 3. The main chassis block is secured to the main body cabinet by 4 screws on the top (see picture). Chassis removal Mirror removal The mirror is attached inside the cabinet cover.
  • Page 202 A/V BACK COVER ASSEMBLY This assembly is secured to H-Board by 8 screws. H-Board 1. H-Board is connected to DG-board with H1 connector. 2. Pull carefully to the right to disconnect. DG-Board 1. Plugs onto A-Board at A13 and A14 connectors (DG3 and DG4 respectively).
  • Page 203 Some tie wraps that secure the wire dressings may need to be unfastened for chassis removal. 3. Remove plug connector in A6 that goes to G-Board (G1). 4. Remove plug connectors in A7, A8 that goes to K-board (K1) and R -board (R1).
  • Page 204 13.2. Disassembly for CRT replacement To facilitate CRT replacement, the complete CRT mounting chassis does not need to be removed. 1. Remove the main chassis block from the cabinet. 2. Remove the optical bracket metal cover (front side x-ray shield) by removing 3 screws on top.
  • Page 205 Focus pack location 8. Release CRT anode lead from CRT chassis wire clamp and all other wires from holders. 9. Loosen a screw that secures the DY and remove it from the CRT neck. Caution: To insure protection against x-ray radiation, the lens must be mounted in place at all times when power is applied to the PTV CRT replacement 1.
  • Page 206 2. Lay CRT face down on a soft cloth. 3. Note position of yoke with centering tabs and remove from defective CRT. 4. Remove CRT DAG ground from defective CRT. Mount it on the replacement CRT exactly as it was on the defective CRT. Note: Replacement CRT is supplied with H.V.
  • Page 207 Please assemble with screws in the order shown and tighten with the same torque. 13.3. PTV screen assemblies Screen assemblies 13.4. Screen assemblies warning When storing or disposing of screen assemblies, be sure not to place them in direct sunlight. These screens may act as a magnifying glass and could cause a fire.
  • Page 208 Preparation: Set the following controls - Picture to Normal - Bright to Normal - Volume to MIN (0) Procedure: 1. Apply a COLOR BAR pattern 2. Connect the negative lead of the digital voltmeter to TPGND1 (cold ground). 3. Connect the positive lead of the digital voltmeter to each test point and confirm the B+ voltages.
  • Page 209 mode option. 2. Select TIMER icon and set SLEEP time for 30 Min. 3. Press “VOL UP ” to exit menus. 4. Tune to the Channel 124. 5. Adjust VOLUME to minimum (0). 6. Press VOL (decrease) on receiver. Red “CHK” appears in upper corner.
  • Page 210 IMPORTANT NOTE Always check that PTV exits the service mode To check colors: Press RECALL on the remote control when in service mode (red “CHK” is displayed) to enter the purity field check mode. Color check 15.3. Service adjustment default values for items DESCRIPTION REGISTER FORMAT...
  • Page 211 DESCRIPTION REGISTER FORMAT NTSC (480i) HD (1080i) VERTICAL TEST POSITION TEST POS V HORIZONTAL TEST TEST POS H POSITION LOW PHASE PHASE LOW HI PHASE PHASE HI HORIZONTAL OSD OSD POS H POSITION VERTICAL OSD POSITION OSD POS V MUTE CONVERGENCE MUTE COARSE ADJ COARS...
  • Page 212 15.5. Instructional flow for service mode (continued...)
  • Page 213 16. CRT Set Up CAUTION: Insure that yoke plugs are reconnected on D-Board before turning the PTV ON to prevent damage to the horizontal output transistor and/or CRTs. 1. Connect test generator to the antenna terminal and set for a monoscope pattern.
  • Page 214 4. Cover replacement CRT lens and static converge the tubes not replaced, if needed. Check size and linearity of pattern and adjust as required 5. Uncover replacement CRT lens and cover other two CRT lenses. Adjust electrical and optical focus (lens), if required. 6.
  • Page 215 H-PAR +390 V-SAW V-PAR 2. Connect the scope probe to R1522 (D30 side), GND to Q551 heat sink. 3. Confirm that level of A is 640 ± 50V, adjust / “H-PAR” DAC to set to specification level. 4. Confirm that voltage level in D30 is similar between point E and F, if not, adjust V-SAW DAC.
  • Page 216 GREEN BLUE Electric focus Optical Focus 2. Set VIDEO “C_OFF” DAC from 00 to 02, and project only red. Adjust red focus VR so that focus is best. Focus pack 3. Adjust red lens focus (mechanical) until focus is best. 4.
  • Page 217 This adjustment is intended to correct the horizontal position of the picture NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a HD 1080i crosshatch pattern that lets adjust the image to correct vertical size (see above note).
  • Page 218 9. Set VIDEO “C_OFF” DAC from 01 to 00. 17.2. Centering magnets adjustment NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Procedures: 1. Apply a crosshatch pattern with dots. 2. Set VIDEO “C_OFF” DAC from 00 to 01 to project only green.
  • Page 219 This adjustment is intended to correct curved sides of the picture. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Procedure: 1. Apply a 1080i HD crosshatch pattern that lets adjust the image to correct curved sides (see above note).
  • Page 220 8. Set VIDEO “C_OFF” DAC from 01 to 00. 17.4. Trapezoid adjustment (TRAP) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. Procedure: 1. Apply a 1080i HD crosshatch pattern. 2. Set VIDEO “C_OFF” DAC from 00 to 01 and project only green.
  • Page 221 This adjustment is intended to make the picture vertically proportional (top, center and bottom) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a pattern that lets adjust the image to correct vertical linearity (see above note).
  • Page 222 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a pattern that lets adjust the image to correct vertical size (see above note). 2. Set VIDEO “C_OFF” DAC from 00 to 01 (to project only green).
  • Page 223 This adjustment is intended to adjust horizontal width of the picture. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. 1. Apply a pattern that lets adjust the horizontal size. 2. Set VIDEO “C_OFF” DAC from 00 to 01 to project only green.
  • Page 224 4. Adjust DAC “BRIGH” data so that bar 1 becomes near black like bar 0. 5. Apply an HD 1080i signal and repeat this adjustment for HD 1080i mode. 6. To check ABL apply a white pattern and put user bright control (BRIGHTNESS in Picture menu) control to max.
  • Page 225 17.12. White balance adjustment NOTE: Use a 7 gray step pattern in this adjustment. This pattern can be obtained from a NTSC generator applying a bar signal without color. This adjustment requires the service user skills in observing what a screen without color should look like (white picture).
  • Page 226 17.13. Color adjustment (TINT, B-Y_G, R-Y_A) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. This adjustment requires that the servicer use the skills in observing what a colorbar pattern should looks like.
  • Page 227 - COLOR to center (31) - PICTURE to max (63) - BRIGHT to center (31) - SHARPNESS to min. (0) - TINT to center (31) - NATURAL COLOR to OFF - COLOR TEMPERATURE to COOL Procedure: 1. Apply a color bar pattern 2.
  • Page 228 6. Use a test signal from a VCR or DVD disk that has a pre-recorded close up of a signal that has good flesh tones. 7. The signal from the VCR or DVD player should look normal. Color Check Using a clean RF or video signal, set the color level so that it does not saturate or appear harsh. Make sure that color is not set so that it appears dull and washed out.
  • Page 229 Stereo separation adjustment (SEPAL & SEPAH) Preparation: 1. Connect an RF signal generator to the RF antenna input. 2. Connect an oscilloscope probe to TP17 (R_OUT, A-board). Procedure: 1. Set PTV to Stereo Mode (in the audio menu). 2. Apply the following signal from the RF signal generator: / Video: 100 IRE flat field, 30% modulation.
  • Page 230 Also EEPROM copy jig can be used to back-up the data before to performadjustments. NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder. IMPORTANT NOTICE: It is strongly recommended to first read and understand the following section prior to make any...
  • Page 231 adjustment. This PTV uses the scheme described below to correct for misconvergence of the three CRT projection tubes. There are various modes to this operation. Preparation: Place the convergence alignment template (see Convergence alignment template section on this manual) over the PTV screen. Align the center lines of the template with the mechanical center markers on the PTV screen frame.
  • Page 232 pattern disappear). 10. Press “TV/VIDEO” key to enter “DATA_POS” mode 11. Adjust by pressing VOL right - left so that peak of curve is the same position as center of cursor. Symmetrical shape 12. Press “TV/VIDEO” key on remote to enter “OSD_POS” mode. 13.
  • Page 233 (FINE/ secs) COARSE) When “7” is pressed and the data is saved, it will overwrite the factory default. 18.1. Coarse adjustment mode (COARS) NOTE: 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV decoder.
  • Page 234 NOTE: It is strongly recommended to first read and understand the following section prior to make any adjustment. / Convergence adjustment must be performed for 480i_p (same for interlace & progressive), ZOOM 480i and 1080i. Procedure: 1. Enter to “G-SIZE” mode: - Select “COARSE”...
  • Page 235 8. Press “7” then “ACTION” key on remote to save changes. 9. Enter to PIN “G-PIN” mode by pressing “TV/VIDEO” 10. Adjust V_PIN by pressing CH up-down (see figure) 11. Adjust H_PIN by pressing VOL right-left. 12. Press “7” then “ACTION” key on remote to save changes “PIN”...
  • Page 236 17. Adjust by pressing CH up-down (see figure) 18. Press “7” then “ACTION” key on remote to save changes “KEY” mode adjustment NOTE: Confirm that pattern looks like a square and almost overlaps the screen frame, check that vertical and horizontal line center match with the marks on screen frame, if linearity is not good enough, repeat adjustments.
  • Page 237 NOTE: Remember always save data following each adjustment by pressing “7” key on remote, then ACTION. 25. Enter to LINEARITY “R-LINEAR” mode by pressing TV/VIDEO. 26. Adjust Horizontal linearity (see figure) 27. Enter to SIZE “R-SIZE” mode by pressing TV/VIDEO. 28.
  • Page 238 39. Perform all adjustments for blue (B-SKEW, B-LINEAR, B-SIZE, B- PIN, B-CORNER, B-KEY) 40. Display border and cross pattern and confirm that blue overlaps with green pattern, if it is not satisfactory, repeat for blue. 41. Press “1 or 3” key repeatedly on remote until green, red and blue (white), confirm that red and blue overlaps with green pattern.
  • Page 239 “FINE” convergence mode after pressing “4” on remote “FINE” convergence mode after pressing “4” on remote...
  • Page 240 PRESS BUTTON 1(go) or change color view 3(back) change pattern 4 (only FINE change crossed sections mode) overlap save data copy from clear POWER exit RECALL display values R-TUNE cycle colors TV/VIDEO change mode TV/VIDEO (3 switch convergence mode (FINE/ secs) COARSE) When “7”...
  • Page 241 6. In “EASY” mode, the adjustment value changes by 4 steps 7. “EASY” mode allows to move lines horizontally and vertically from the center of cursor “EASY” mode adjustment, possible locations for cursor 8. This mode affects a wide area around the cursor than other adjustment modes, See values on screen by pressing RECALL on remote 9.
  • Page 242 14. Enter to POINT “G-POINT” (for green) mode by pressing TV/ VIDEO. 15. “POINT” mode allows to move line horizontally and vertically from the perimeter of cursor making rounded lines become straight 16. In “POINT” mode, the adjustment data changes by 2 steps, See values on screen by pressing RECALL on remote 17.
  • Page 243 26. Begin adjustment from the center to the edge of the screen (see figure) 27. Adjust to make distribute lines LINE, POINT, ORIG. POINT modes, possible locations for cursor 28. Then press “1 or 3” on the remote until red and green appears. NOTE: Since convergence adjustment will not allow to adjust every single cross section of the grid, it is very important to adjust, so that overall looks best, in “FINE”...
  • Page 244 33. At this point the crosshatch pattern should look white. 34. If the crosshatch pattern is not only white, repeat adjustment for that specific color (red or blue). 35. Once the crosshatch pattern looks only white, perform the adjustments for White only (“POINT”, “ORIG. POINT” & “LINE”), notice that each adjustment must be only for white (red, green,blue) 36.
  • Page 245 Autoconvergence Troubleshoot (ERROR display) When autoconvergence feature is executed and the procedure doesn’t complete accordingly by displaying an error number on screen, check the possible causes in the following order: 1. Make sure convergence and electrical adjustments are properly set. 2.
  • Page 246 Vertical Center Axis and work outwards until the pattern is complete. Pay attention to the actual dimensions of the pattern. Template dimensions: - 53”: 1173.3mm horizontal x 660mm vertical. Single grid dimension: HORIZONTAL VERTICAL 189.22 mm 94.29 mm NOTE: A convergence alignment template, part number TXFQD01FSER is available through Matsushita/ Panasonic Services Convergence template.
  • Page 247 19. Reference of PDF links color 20. Conductor views 20.1. A-Board Printed Circuit ( page 1 of 2 ) 20.2. A-Board Printed Circuit ( page 2 of 2 ) 20.3. D-Board Printed Circuit ( page 1 of 2) 20.4. D-Board Printed Circuit ( page 2 of 2)
  • Page 248 20.5. DC-Board Printed Circuit ( Top & bottom view) 20.6. DG-Board Printed Circuit (bottom view) 20.7. DG-Board Printed Circuit ( top view ) 20.8. H-Board Printed Circuit 20.9. CD, G, K & R Printed Circuit Boards 20.10. LB-Board Printed Circuit 20.11.
  • Page 250 22.2. Notas de los diagramas esquem á ticos...
  • Page 252 22.3. A-Board schematic 1 of 3 22.4. A-Board schematic 2 of 3 22.5. A-Board schematic 3 of 3 22.6. D-Board schematic 1 of 5 22.7. D-Board schematic 2 of 5 22.8. D-Board schematic 3 of 5 22.9. D-Board schematic 4 of 5 22.10.
  • Page 253 22.26. LB-Board schematic 2 of 2 22.27. LG-Board schematic 1 of 2 22.28. LG-Board schematic 2 of 2 22.29. LR-Board schematic 1 of 2 22.30. LR-Board schematic 2 of 2 22.31. Voltages 22.32. Waveforms 23. Parts location 24. Parts list...
  • Page 254 24.1. Description of abbreviations guide 24.2. Parts list...
  • Page 255 Ref. No. Part No. Part Name & Description Remarks CAPACITORS C001 ECA1HM4R7B CAP E 4.7UF-50V C003 ECJ2VC1H101J CAP C 100PF-J-50V C004 ECJ2VF1E224Z CAP C .22UF-Z-25V C006 EEUFC1A471B CAP E 470UF-16V C007 ECA1HM4R7B CAP E 4.7UF-50V C009 ECJ2VC1H101J CAP C 100PF-J-50V C010 ECJ2VF1E224Z CAP C .22UF-Z-25V...
  • Page 256 Ref. No. Part No. Part Name & Description Remarks C331 ECA1HM470B CAP E 47UF-50V C332 ECKR1H103ZF5 CAP C .01UF-Z-50V C333 ECA1HM470B CAP E 47UF-50V C334 ECA2EM470B CAP E 47UF-250V C335 ECCR1H221JC5 CAP C 220PF-J-50V C336 ECA1HM470B CAP E 47UF-50V C337 ECKR1H103ZF5 CAP C .01UF-Z-50V C339...
  • Page 257 Ref. No. Part No. Part Name & Description Remarks C531 ECA160V33UE CAP E 33UF-160V C533 ECKR2H101KB5 CAP C 100UF-K-500V C535 ECA1EM471E CAP E 470UF-25V C601 EEUFC1C331B CAP E 330UF-16V C602 ECJ2VF1H103Z CAP C .01UF-Z-50V C653 ECA1HM010E CAP E 1UF-50V C654 ECA1HM010E CAP E 1UF-50V C701...
  • Page 258 Ref. No. Part No. Part Name & Description Remarks C852 ECA1EM101B CAP E 100UF-25V C853 ECJ2YF1E474Z CAP C .47UF-Z-25V C854 ECA1CM101B CAP E 100UF-16V C855 ECJ2VF1H104Z CAP C .1UF-Z-50V C856 ECJ2VF1H103Z CAP C .01UF-Z-50V C860 ECJ2VB1H103K CAP C .01UF-K-50V C861 ECJ2VF1H103Z CAP C .01UF-Z-50V C862...
  • Page 259 Ref. No. Part No. Part Name & Description Remarks C967 ECA2CM100E CAP E 10UF-160V C968 ECA1CM101B CAP E 100UF-16V C969 ECA1CM101B CAP E 100UF-16V C970 ECA2CM100E CAP E 10UF-160V C971 ECQE2104KFW CAP P .10UF-K-200V C972 ECA1HM220B CAP E 22UF-50V C1303 ECJ2VF1H103Z CAP C .01UF-Z-50V C1304...
  • Page 260 Ref. No. Part No. Part Name & Description Remarks C2344 ECJ3VB1H104K CAP C .1UF-K-50V C2346 ECJ2VB1H471K CAP C 470PF-K-50V C2348 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2349 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C2352 ECJ2VB1H682K CAP C .0068UF-K-50V C2353 ECJ2VB1H471K CAP C 470PF-K-50V C2356 ECJ2VB1H333K CAP C .033UF-K-50V C2359...
  • Page 261 Ref. No. Part No. Part Name & Description Remarks C3203 ECJ2VB1H152K CAP C .0015UF-K-50V C3331 ECJ2VB1H152K CAP C .0015UF-K-50V C3332 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3333 ECJ2VB1H152K CAP C .0015UF-K-50V C3334 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3335 ECJ2VB1H152K CAP C .0015UF-K-50V C3336 ECJ2VF1C105Z CAP C 1.0UF-Z-16V C3337...
  • Page 262 Ref. No. Part No. Part Name & Description Remarks C7065 ECA1VM470B CAP E 47UF-35V DIODES D001 MAZ31500ML DIODE ZENER D002 MAZ31500ML DIODE ZENER D003 MAZ31500ML DIODE ZENER D004 MAZ31500ML DIODE ZENER D081 LN21RCPHL DIODE D082 MAZ40560MF DIODE ZENER D083 MAZ40560MF DIODE ZENER D301 MA2C16700E...
  • Page 263 Ref. No. Part No. Part Name & Description Remarks D511 B0HAHP000014 DIODE D512 B0HALP000002 DIODE FAST RECOVERY D513 MA2C165001VT DIODE D0514 MAZ30300LL DIODE ZENER D515 B0HALP000002 DIODE FAST RECOVERY D516 EU2YXV0 DIODE D519 AU02ZV0 DIODE D520 MA3X152K0L DIODE D634 MA2C165001VT DIODE D650 MAZ41100MF...
  • Page 264 Ref. No. Part No. Part Name & Description Remarks D962 MA2C18800E DIODE D973 B0ZAZ0000047 DIODE D983 B0ZAZ0000047 DIODE D1502 B0HACW000001 DIODE D1503 MAZ30300LL DIODE ZENER D1504 B0HACW000001 DIODE D1505 MA2C0290BF DIODE D1506 MAZ30510ML DIODE D1507 MAZ30300LL DIODE ZENER D1510 MAZ30300LL DIODE ZENER D1599 MA3X152K0L...
  • Page 265 Ref. No. Part No. Part Name & Description Remarks IC801 AN8029 POWER SUPPLY IC802 C0EAS0000025 MAIN REGULATOR IC805 AN78M12LB 12V REGULATOR IC811 0N3171RLF OPTO COUPLER IC872 C0DACMG00001 9V REGULATOR IC874 SI-8050J 5V REGULATOR IC875 C0DACMG00001 3.3V REGULATOR IC876 C0DACMG00001 2.5V REGULATOR IC877 C0DACMG00001 1.8V REGULATOR...
  • Page 266 Ref. No. Part No. Part Name & Description Remarks L810 EXCELDR25V FERRITE BEAD L811 EXCELDR25V FERRITE BEAD L815 EXCELSA39E EMI BEAD CORE L816 EXCELSA39E EMI BEAD CORE L817 TALL08T680KA COIL L818 TALL08T680KA COIL L819 EXCELDR35V FERRITE BEAD L820 EXCELDR35V FERRITE BEAD L821 EXCELDR35V FERRITE BEAD...
  • Page 267 Ref. No. Part No. Part Name & Description Remarks L7004 EXCELSA39V EMI BEAD CORE L7005 EXCELSA39V EMI BEAD CORE L7006 EXCELSA39V EMI BEAD CORE LF801 ELF21N035A LINE FILTER LF803 ELF21N035A LINE FILTER TRANSISTORS Q301 2SC1473ATA TRANSISTOR Q302 2SC3526H TRANSISTOR Q303 2SC1473ATA TRANSISTOR Q304...
  • Page 268 Ref. No. Part No. Part Name & Description Remarks Q908 2SC3311ATA TRANSISTOR Q934 2SA1309ATA TRANSISTOR Q935 2SC3311ATA TRANSISTOR Q936 2SC3311ATA TRANSISTOR Q937 2SA1309ATA TRANSISTOR Q938 2SB1321ARA TRANSISTOR Q941 2SD1992ARA TRANSISTOR Q951 2SC3311ATA TRANSISTOR Q952 2SC3311ATA TRANSISTOR Q953 2SC3311ATA TRANSISTOR Q955 2SA1248SRA TRANSISTOR Q956...
  • Page 269 Ref. No. Part No. Part Name & Description Remarks R009 ERJ6GEYJ103V RES M 10K-J-1/10W R010 ERJ6GEYJ103V RES M 10K-J-1/10W R013 ERG1SJ273P RES M 27K-J-1W R015 ERG1SJ273P RES M 27K-J-1W R072 ERDS2TJ101T RES C 100-J-1/4W R073 ERDS2TJ471T RES C 470-J-1/4W R080 ERDS2TJ222T RES C 2.2K-J-1/4W R081...
  • Page 270 Ref. No. Part No. Part Name & Description Remarks R349 ERDS2TJ821T RES C 820-J-1/4W R350 ERG12SJ101P RES M 100-J-1W R351 ERDS1FJ330P RES C 33-J-1/2W R352 ERDS1FJ330P RES C 33-J-1/2W R353 ERG12SJ101P RES M 100-J-1W R354 ERDS2TJ473T RES C 47K-J-1/4W R355 ERDS1FJ103T RES C 10K-J-1/2W R356...
  • Page 271 Ref. No. Part No. Part Name & Description Remarks R464 ERJ6GEYJ102V RES M 1K-J-1/10W R465 ERJ6GEYJ472V RES M 4.7K-J-1/10W R465 ERJ6GEYJ472V ES M 4.7K-J-1/10W R466 ERJ6GEYJ562V RES M 5.6K-J-1/10W R470 ERDS2TJ331T RES C 330-J-1/4W R471 ERDS2TJ331T RES C 330-J-1/4W R472 ERDS2TJ331T RES C 330-J-1/4W R501...
  • Page 272 R814 ERDS2TJ4R7T RES C 4.7-J-1/4W...
  • Page 273 Ref. No. Part No. Part Name & Description Remarks R815 ERJ6GEYJ301V RES M 300-J-1/10W R816 ERDS2TJ471T RES C 470-J-1/4W R817 ERJ6ENF2001V RES M 2K-F-1/10W R818 ERDS1FJ100T RES C 10-J-1/2W R820 ERDS1FJ470T RES C 47-J-1/2W R822 ERJ6GEYJ222V RES M 2.2K-J-1/10W R833 ERJ6GEYJ101V RES M 100-J-1/10W R835...
  • Page 274 Ref. No. Part No. Part Name & Description Remarks R919 ERDS2TJ472T RES C 4.7K-J-1/4W R920 ERDS2TJ681T RES C 680-J-1/4W R921 ERDS2TJ151T RES C 150-J-1/4W R925 ERDS2TJ151T RES C 150-J-1/4W R926 ERDS2TJ151T RES C 150-J-1/4W R928 ERQ14AJ220P RES F 22-J-1/4W R929 ERDS2TJ101T RES C 100-J-1/4W R940...
  • Page 275 Ref. No. Part No. Part Name & Description Remarks R1329 ERJ6GEYJ101V RES M 100-J-1/10W R1330 ERJ6GEYJ101V RES M 100-J-1/10W R1331 ERJ6GEYJ101V RES M 100-J-1/10W R1332 ERJ6GEYJ101V RES M 100-J-1/10W R1338 ERJ6GEYJ103V RES M 10K-J-1/10W R1502 ERJ6GEYJ222V RES M 2.2K-J-1/10W R1503 ERJ6GEYJ102V RES M 1K-J-1/10W R1504...
  • Page 276 Ref. No. Part No. Part Name & Description Remarks R2334 ERJ6ENF4701V RES M 4.7K-F-1/10W R2336 ERJ6ENF5232V RES M 5.32K-F-1/10W R2337 ERJ6ENF1501V RES M 1.5K-F-1/10W R2339 ERJ12YJ101U RES M 100-J-1/2W R2341 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2342 ERJ6GEYJ122V RES M 1.2K-J-1/10W R2343 ERJ6GEYJ103V RES M 10K-J-1/10W R2344...
  • Page 277 Ref. No. Part No. Part Name & Description Remarks R3306 ERJ6ENF75R0V RES M 75.0-F-1/10W R3307 ERJ6GEYJ184V RES M 180K-J-1/10W R3308 ERJ6ENF75R0V RES M 75.0-F-1/10W R3309 ERJ6ENF75R0V RES M 75.0-F-1/10W R3310 ERJ6ENF75R0V RES M 75.0-F-1/10W R3311 ERJ6ENF75R0V RES M 75.0-F-1/10W R3312 ERJ6ENF75R0V RES M 75.0-F-1/10W R3313...
  • Page 278 Ref. No. Part No. Part Name & Description Remarks R7055 ERJ6GEYJ332V RES M 3.3K-J-1/10W R7058 ERJ6GEYJ332V RES M 3.3K-J-1/10W R7059 ERJ6GEYJ104V RES M 100K-J-1/10W R7060 ERX1SJR27P RES M .27-J-1W R7061 ERJ6GEYJ102V RES M 1K-J-1/10W R7062 ERJ6GEYJ103V RES M 10K-J-1/10W R7063 ERJ6GEYJ103V RES M 10K-J-1/10W R7064...
  • Page 279 Ref. No. Part No. Part Name & Description Remarks TKD2AX2831S INNER BOARD TKU2AC4201S LOWER BACK CABINET EAST6PH08P6 SPEAKER (TWEETER) TAS2AA0022 SPEAKER (TWEETER) EAST16P51A6 SPEAKER (WOOFER) TAS2AA0027 SPEAKER (WOOFER) TKP2AA1101S SPEAKER BASE COVER TKP2AA1052S SPEAKER GRILLE TLH2AH001 DISTRIBUTOR D9ZZ00000079 FOCUS PACK M004 TMX2AX0031 FOCUS BRACKET...
  • Page 280 LG-BOARD 2 of 2 TNP2AA160 PT-53X54J...
  • Page 281 LG-PCB TNP2AA160 PT-53X54J...
  • Page 282 LR-BOARD 1 of 2 TNP2AA162 PT-53X54J...
  • Page 283 LR-BOARD 2 of 2 TNP2AA162 PT-53X54J...
  • Page 284 LR-PCB TNP2AA162 PT-53X54J...
  • Page 287 A - BOARD - TNP2AH058 IC1302 IC872 IC2401 IC876 IC2201 ..0.00 ..19.40 ..4.40 ..8.90 ..19.40 ..1.60 .
  • Page 288 D - BOARD - TNP2AH059 IC1501 IC701 IC7001 IC811 IC801 ..10.80 ..0.20 ..0.00 ..19.30 ..19.50 ..1.40 .
  • Page 289 LG - BOARD - TNP2AA160 IC880 Q331 Q373 Q374 Q375 Q934 Q935 Q936 Q937 ..18.30 4.10 12.00 172.10 171.00 0.00 0.00 0.70 0.00 ..0.00 11.60 170.70 218.80 0.40 0.00 19.30 19.30 0.00 .
  • Page 290 A-Board TNP2AH058 2.04 Vp-p .292 Vp-p 1.08 Vp-p A4 PIN 1 (V-SAW) A4 PIN 4 (EHT ADJ) A14 PIN 13 (MAIN VIDEO) 3.56Vp-p 5.65 Vp-p 0.178 Vp-p A2 PIN 11 (SOS3 CONV) A2 PIN 3 (H-DRV) A2 PIN 5 (FBP) 3.36 Vp-p 3.36 Vp-p 0.176 Vp-p...
  • Page 291 D-Board TNP2AH059 1.56 kVp-p 12.6 Vp-p 0.65 Vp-p Q551-C IC701 PIN 3 Q551-B 13.4 Vp-p 2.28 Vp-p 3.60Vp-p IC701 PIN 7 D23 PIN 10 (DAF) IC701 PIN 6 2.04 Vp-p 2.02 Vp-p 1.44 Vp-p D22 PIN 3 (BH) D22 PIN 4 (GV) D22 PIN 2 BV 1.94 Vp-p 1.17 Vp-p...
  • Page 294 A-BOARD 1 of 3 TNP2AH058 PT-53X54J...
  • Page 295 A-BOARD 2 of 3 TNP2AH058 PT-53X54J...
  • Page 296 A-BOARD 3 of 3 TNP2AH058 PT-53X54J...
  • Page 297 A-PCB TNP2AH158 PAGE 1 OF 2 PT-53X54J...
  • Page 298 A-BOARD TNP2AH158 PAGE 2 OF 2 PT-53X54J...
  • Page 299 CD-BOARD / G-BOARD / K-BOARD / R-BOARD TNP2AA166 / TNP2AA164 / TNP2AA165 / TNPA0615AB PT-53X54J...
  • Page 300 CD-PCB / G-PCB / K-PCB / R-PCB TNP2AA166 / TNP2AA164 / TNP2AA165 / TNPA0615AB PT-53X54J...
  • Page 301 D-BOARD 1 of 5 TNP2AH059 PT-53X54J...
  • Page 302 D-BOARD 2 of 5 TNP2AH059 PT-53X54J...
  • Page 303 D-BOARD 3 of 5 TNP2AH059 PT-53X54J...
  • Page 304 D-BOARD 5 of 5 TNP2AH059 PT-53X54J...
  • Page 305 D-PCB PAGE 1 of 2 TNP2AH059 PT-53X54J...
  • Page 306 D-PCB PAGE 2 of 2 TNP2AH059 PT-53X54J...
  • Page 307 DC-BOARD 1 of 2 TNP2AA163 PT-53X54J...
  • Page 308 DC-BOARD 2 of 2 TNP2AA163 PT-53X54J...
  • Page 309 DC-PCB TOP & BOTTOM VIEW TNP2AA163 PT-53X54J...
  • Page 310 DG-BOARD 1 of 11 TNP2AA173AE PT-53X54J...
  • Page 311 DG-BOARD 2 of 11 TNP2AA173AE PT-53X54J...
  • Page 312 DG-BOARD 3 of 11 TNP2AA173AE PT-53X54J...
  • Page 313 DG-BOARD 4 of 11 TNP2AA173AE PT-53X54J...
  • Page 314 DG-BOARD 5 of 11 TNP2AA173AE PT-53X54J...
  • Page 315 DG-BOARD 6 of 11 TNP2AA173AE PT-53X54J...
  • Page 316 DG-BOARD 7 of 11 TNP2AA173AE PT-53X54J...
  • Page 317 DG-BOARD 8 of 11 TNP2AA173AE PT-53X54J...
  • Page 318 DG-BOARD 9 of 11 TNP2AA173AE PT-53X54J...
  • Page 319 DG-BOARD 10 of 11 TNP2AA173AE PT-53X54J...
  • Page 320 DG-BOARD 1 1 of 11 TNP2AA173AE PT-53X54J...
  • Page 321 DG-PCB BOTTOM VIEW TNP2AA173 PT-53X54J...
  • Page 322 DG-PCB TOP VIEW TNP2AA173 PT-53X54J...
  • Page 323 H-BOARD TNP2AA174AD PT-53X54J...
  • Page 324 H-PCB TNP2AA174 PT-53X54J...
  • Page 325 LB-BOARD 1 of 2 TNP2AA161 PT-53X54J...
  • Page 326 LB-BOARD 2 of 2 TNP2AA161 PT-53X54J...
  • Page 327 LB-PCB TNP2AA161 PT-53X54J...
  • Page 328 LG-BOARD 1 of 2 TNP2AA160 PT-53X54J...

This manual is also suitable for:

Pt-53tw54j

Table of Contents