Panasonic PT-40LC12 Service Manual page 131

REMOVAL OF THE SCREEN UNIT, THE
MIRROR AND THE BACK PANEL
1. Remove the Rear Cover, the AV Front Door, the Front
Cover L Unit and the Front Cover R Unit. Refer to Steps 1~4
in "HOW TO REMOVE THE TV MAIN C.B.A. AND THE
REAR JACK C.B.A."
2. Remove the only 10 Screws of the Back Panel as shown.
Then, remove the Screen Unit from the front side.
Note:
The Screen Unit is supplied as a unit only. The individual
parts in Screen Unit are not supplied separately.
Screws "b"
Screw "b"
Screws "b"
<Rear View>
3. 1) Remove the 2 Top Mirror Plates by removing the 4
Screws.
2) Remove the Mirror from the top by releasing the slots
carefully.
Note:
When removing, be careful that the Mirror does not fall
down.
Screws "b"
Back Panel
Screw "b"
Screws "b"
Screen Unit
Fig. D5-1
Top Mirror Plates
Screws "b"
Sheet
Sheet Sheet
Mirror
Upper Slots
(for model with 45 inch)
Mirror support
bracket
Lower Slots
(for model with 40 inch)
<Front View>
Screws "b"
Sheet
Mirror support
bracket
Fig. D5-2