Panasonic PT-40LC12 Service Manual page 123

14. Remove the Rear Jack C.B.A. by disconnecting Connectors
P4601, P4603 and P4604 on the TV Main C.B.A. and
release it from the clamper.
Note:
1. When replacing the Rear Jack C.B.A., remove the GND
Plate from the Rear Jack C.B.A.
2. Take extreme caution when handling the Rear Jack
Panel to avoid damage to Connectors P4601, P4603,
P4604 on the TV Main C.B.A.
Clampers
GND Plate
P4601
Rear Jack C.B.A.
TV Main C.B.A.
Rear Jack C.B.A.
P5004
(Not used)
P4603 P4604
Fig. D1-14
15. 1) Remove the Support Plate by removing the 2 Screws.
2) Remove the 3 Screws on the TV Main C.B.A.
3) Remove the TV Main C.B.A. from the TV Frame by
releasing the 3 Tabs.
4) Remove the AC Cord from Connector P801.
P3001
(Not used)
Support Plate
Tab
Screws "a"
Screws "d"
Screw "d"
Tab
TV Main C.B.A.
Note:
1. When servicing, be careful not to damage the connectors
on the C.B.A.s.
2. Connector P3001 is deleted on running change basis.
TV Main C.B.A.
Screw "d"
P6207
(Not used)
Screw "d"
P801
Tab
TV Frame
Fig. D1-15
Fig. D1-16