Panasonic PT-40LC12 Service Manual page 132

Reassembly Notes for Mirror:
Install the Mirror as following procedures.
1) Peel the Protection Sheet approx. 20 mm (maximum 22
mm) from the top and bottom edges of the Mirror to
place the Sheet. Then, place the 4 sheets on the top and
bottom edges of the Mirror as shown.
Sheet
Protection sheet
Mirror
Sheet
<Front View>
Fig. D5-3-1
2) When handling the Mirror, do not touch the Mirror
surface. Be sure to hold the sheet portions of the Mirror.
3)
Insert the Mirror from the top into the lower slots (For
model with 40 inch Mirror) or into the upper slots (For
model with 45 inch Mirror) of the Back Panel carefully
avoiding the Mirror Support Brackets. Otherwise, the
Mirror may crack.
Then, the Mirror is secured with the Mirror Support
Brackets.
4) Install the 2 Top Mirror Plates on the Mirror and tighten
the 4 Screws.
5) Peel the Protection Sheet from the Mirror.
Top edge
of Mirror
Sheet
Sheet
Sheet
Sheet
Bottom edge
of Mirror
CAUTION:
Mirror support bracket
Mirror
Fig. D5-3-2
Top Mirror Plates
Screws "b"
Mirror
(Protection Sheet)
<Side View>
Back Panel
Upper Slots
(for model with 45 inch Mirror)
Lower Slots
(for model with 40 inch Mirror)
Slots
Fig. D5-4