Panasonic PT-40LC12 Service Manual page 12

original replacement parts which are listed with their part numbers in
the parts list.
2. IMPORTANT SAFETY NOTICE
Components identified by the sign
important for safety. When replacing any of these components, use
only the specified parts.
3. SPECIAL NOTE
All integrated circuits and many other semiconductor devices are
electrostatically sensitive and therefore require the special handling
techniques described under the "ELECTROSTATICALLY SENSITIVE
(ES) DEVICES" section of this service manual.
4. Parts with no Ref. No. in "EXPLODED VIEWS" are not supplied. And
some Ref. No. will be skipped. Be sure to make your orders of
replacement parts according to the parts list.
5. Parts different in shape or size may be used. However, only
interchangeable parts will be supplied as service replacement parts.
6. Parts with mark "MKE" in the Remarks column are supplied from MKE.
Others are supplied from MKA.
7. Item numbers with capital letter E (Example: E10, E20,...) in the Ref.
No. column are shown in the exploded views.
8. Parts whose Ref. Nos. are the same are interchangeable as
replacement parts. Any of these parts may be ordered and used as a
replacement part.
12.1.2. Mechanical Replacement Notes
1. Section No. of parts shown in Exploded Views are indicated in the
Remarks column.
2. After replacing the Projection Unit (Ref. No. 11), be sure to perform
"Picture Position Adjustment," "Focus Adjustment," "Set LAMP RUN
TIME of original value," and "Reset Filter Time." Refer to "WHEN
REPLACING THE PROJECTION UNIT ON THE UNIT AT THE USER'S
LOCATION" in SERVICE NOTES.
3. When replacing the Projection Unit (Ref. No. 11), be sure to place the
Light Prevention Plate B (Ref. No. 16) on it.
4. The Infrared Remote Control Unit (Ref. No. 123) replacement part is
available as a complete assembly unit only. Do not try to disassemble
have special characteristics
12