Panasonic PT-40LC12 Service Manual page 44

WIRE AND LEAD POSITION DIAGRAM
After servicing, make sure that all wires, leads, and clampers are placed in their original position. It is important for the best
operation of the unit.
Note:
Use extreme care especially for the following.
Sheet
P3002
Speaker Connector Lead
Sheet
Connector Lead (from
Lamp Cover Switch C.B.A.)
P1005 (or P1007):
GND Wire 1pin
GND Plate
P1010
(To Duct Fan) P4504
P2501 P2501
(To P5003) (To P5003)
P2701
(To P3801)
P2305
(To P6205)
P4503
P4602 P4502
P4501
P2911
Sheet
Speaker Connector Lead
Front Thermistor C.B.A.
GND Wires
Clampers Clampers Clampers Clampers
(To Audio
Power C.B.A.)
Clamper
Clamper
P3901
P7001:
GND Wire 1pin
Lamp Thermistor C.B.A.
P1902
(from Lamp Fan)
P1905
P1903
(from
Solenoid)
P2307
(from Lamp
Thermistor)
P3006:
GND Wire 1pin
Clampers Clampers
Fig. 9
GND Plate
P804
Temperature Fuse (P1701)
GND Wire
GND Plate
Connector cable
(From P1702 on the LCD Power C.B.A.
to P1905 on the LCD Main C.B.A.)
Clampers
P1101
GND Wire
Lamp Socket
cable
GND Wire
GND Plate