4. 1) Remove the Light Prevention Sheet by removing the 3
Screws.
2) Remove the Back Panel by removing the 18 Screws.
Then, lift up the Back Panel.
Screw "f"
Screw "f"
Screw "f"
<Rear View>
Screw "f"
Screw "f"
<Side View>
Screw "f"
Screw "f"
Light Prevention Plate
Screw "f"
Screw "f"
<Front View>
Screw "f"
Screw "f"
Screw "f"
Screw "f"
Screw "f"
Fig. D5-5
Screw "f"
Screw "f"
Screws "a"
Screw "f"
Screw "f"
Fig. D5-6
Reassembly Notes for Back Panel:
1) Insert the Back Panel to the holes of the Optical Base
Plate.
2) Tilt the Back Panel as indicated by the arrow and set the
Back Panel Unit into the Hooking Portions of the Joint
Plates as shown.
<Side View>
Back
Panel
Hooking
Portion of
Joint Plate
<Front View>
(left)
Fig. D5-7
hole
Optical Base
Plate
hole
hole
Tilt
Back
Panel
Hooking
Portion of
Joint Plate
<Front View>
(right)