Table of Contents
Advertisement
Output Status Screen
The output status screen allows you to check the
functions on the remote control (See Figure 4-28.)
NOTE
The front and rear sideshift functions are a combination
of extend/retract and street/curb outrigger functions;
therefore, multiple functions will be working in conjunction
and will be reflected on your computer screen.
output status
1. The left column shows the CAN messaging from the
remote control keypads.
2. The two center columns show the output status. The
top half of the columns are for the front functions of
the remote and the bottom columns are for the rear
functions of the remote. As each function is
manipulated, the status will toggle between "ON" and
"OFF".
3. The right column indicated voltage status and should
be between 11 and 14 volts (ex. 12644 x .001 =
12.64 volts).
Figure 4-28: Output Status
MAINTENANCE AND LUBRICATION
4-33
Advertisement
Table of Contents
