LifeSpan COMMANDER User Manual page 22

E3 : Over speed protection. (Sudden increase of running belt speed).
1. Check the speed sensor and m
obstructions on the magnet.
2. Check wire connections on
3. Replace the speed sensor.
4 . Replace the controller.
E4 : Incline fault
1. Replace incline motor.
2. If problem remains replace controller.
W hen alarm signals are displayed, single press 'CLEAR' to reset the displays and try again.
N o Power
1. Check fuses (They are located on the controller under the motor cover next to the
on/off switch.
2. Check power outlet (Plug someth
power outlet is working correctly).
3. Check Power Cable (You may need to take t to an electrician).
agnet are in correct alignment and that there are no
the controller.
ing else into the power outlet to ensure that the
i
LIFESPAN COMMANDER Page 21