Table of Contents
Advertisement
Step 3.
Rotate control panel section fully till the hinge
and slide into locked position. Fix the Uprights
and base with (4x) 10mmx55mm threaded bolts
using appropriate tool (see right).
Make sure you do not over tighten the bolts as it
may bend the handrails. (view right).
Step4.
Fix the Uprights and console with (2x)
8mmx55mm threaded bolts by using appropriate
Allen key (see right).
Step5
Install the plastic ornaments onto both sides of
base with (4x) 4mmx16mm threaded bolts using
appropriate tool (see right).
Ensure all fixings are tightly secured and the treadmill is soundly constructed.
LIFESPAN COMMANDER
Page 6
Advertisement
Table of Contents
