ELEMENT LINE: Service & Maintenance Manual - rev. 1.2
5.10. DISASSEMBLING HANDLES ADJUSTING SYSTEM ON
CHEST PRESS
Figure 5.10-1
Figure 5.10-2
Figure 5.10-3
All manuals and user guides at all-guides.com
1. Back off the screw (a) using a 6-mm hex
2. Back off the screws (b) using a 6-mm hex
3. Remove the handle assembly from the
4. Remove the selector plate (c).
wrench.
wrench.
machine lever.
Take care during reassembly procedure
to replace the plate "c" in the right way
as shown in the figure to side.
Continued on next page
→
Page 5.15