Packing Checklist - Billy Goat QV PUSH Operator's Manual

QV PUSH Owner's Manual

PACKING CHECKLIST

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the nozzle and handle.
READ all safety instructions before assembling unit.
TAKE CAUTION when removing the unit from the box.
PUT OIL IN ENGINE BEFORE STARTING
PARTS BAG & LITERATURE ASSY
Warranty card P/N- 400972, Operator's Manual P/N-27831516, Declaration of Conformity P/N-100506. General
Safety and Warnings Manual P/N-100294
ASSEMBLY
NOTE: Items in ( ) can be referenced in the Parts Illustrations and Parts Lists on pages 10-13
1. REMOVE the unit from the box. Be careful as not to damage the unit.
2. REMOVE the bag and attach the handle to the hood using the hardware from the parts bag. The large washer should be on
the inside and the bolt should run from the inside of the hood out. The arch of the handle should be facing to the front of the
machine and the cables shoud not be twisted around each other. NOTE: The left cable should run to the right side of the
transmission and right cable to the left of the transmission. Cable twisting will interfere with the operation of the machine
and will cause premature cable wear.
3. ATTACH the front nozzle (item 7) to the housing and secure it with the serrated hex nuts (item 58) located in the parts bag.
Part No 27831508
Boxing Parts Checklist
Debris Bag P/N-831225
Dust Sock P/N-831268
Front Nozzle P/N-831606
Literature Assy P/N-831021
Screwcap 5/16"-18 x 1 3/4 qty 4
P/N-8041031
Washer 2" OD x .344 ID qty 4
P/N-810652
Washer 5/16" Flat qty 4
P/N-8171003
Nut Lock 5/16" – 18 qty 4
P/N-8160002
Briggs & Stratton 5.0 HP
5