Instruction Labels; Packing Checklist - Billy Goat AET60 Owner's Manual

Instruction Labels

The labels shown below were installed on your Billy Goat® Aerator. If any labels are
damaged or missing, replace them before operating this equipment. Part numbers from the
Illustrated Parts List are provided for convenience in ordering replacement labels. The correct
position for each label may be determined by referring to the part numbers shown.
LABEL DANGER CLEAR
P/N 100311

Packing Checklist

Your Billy Goat® AET60 is shipped from the factory in one carton, completely assembled.
Read all safety instructions before assembling unit.
Take caution when removing the unit from the box.
Parts Bag and Literature Assembly
• Warranty Card P/N - 400972
• Owner's Manual P/N - 100384
• General Safety and Warranty
Renovation Manual P/N - 100295
• General Safety and Warranty
Manual P/N - 100295
Assembly
1. The machine is fully assembled; you will need to attach to a vehicle in the desired configuration (see
operation section for details).
Part No. 100384
LABEL HARD SOIL
P/N 100372
LABEL HITCH MOUNT
P/N 100374
4
LABEL MAX LOAD
P/N 100356
Boxing Parts Checklist
Owner's Manual
P/N 100384
100384_A_LO