Billy Goat CR550HC Owner's Manual
  1. Manuals
  2. Brands
  3. Billy Goat Manuals
  4. Lawn and Garden Equipment
  5. CR550HC
  6. Owner's manual
Billy Goat CR550HC Owner's Manual

Billy Goat CR550HC Owner's Manual

Billy goat power rake owner's manual
Hide thumbs Also See for CR550HC:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's/operator's Manual
Accessories
SLICING REEL
SLICING BLADES
A complete verti-
A full set of twenty
slicing reel for your
blades for
CR. 20" wide reel for
replacement. Includes
use in grasses that
40 new capscrews,
require vertical
and lock nuts for
cutting, and for
replacement
assisting in lawn
installation.
overseeding projects.
P/N 350252
Part No 350245
BILLY GOAT CR550HC POWER RAKE
Owner's Manual

Replacement Parts

A complete
replacement set.
44 of 1/2" spacer
bumpers and 4
of 1/4" spacer
bumpers
P/N 350187
CR Owner's Manual
DRIVE
SPACER
BELT
BUMPERS
Original
Equipment drive
belt for your CR.
P/N 350258
P/N 350207
1
FLAIL
FLAIL SHAFTS
BLADES
A full set of four
shafts for
A complete
replacement.
replacement set.
Includes 8 new lock
52 of our high
clips for
quality flail
replacement
blades for your
installation.
CR. Includes 8
Note: We
new lock clips for
recommend
replacement
replacing the shafts
installation.
when you replace
flails.
P/N 350251
P/N 350185
Form No F062206A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CR550HC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billy Goat CR550HC

Summary of Contents for Billy Goat CR550HC

  • Page 1: Replacement Parts

    BILLY GOAT CR550HC POWER RAKE Accessories SLICING REEL SLICING BLADES A complete verti- A full set of twenty slicing reel for your blades for CR. 20" wide reel for replacement. Includes use in grasses that 40 new capscrews, require vertical...

  • Page 2: Table Of Contents

    ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling, operating, or servicing your equipment.

  • Page 3: Serial Plate Data And Specifications

    Total Unit Weight: Max. operating slope Lwa at operator position Lpa at operator position Vibration at operator position Part No 350245 CR Owner’s Manual CR550HC 5.0 (3.73 kW) GC160AQHA HONDA OHC 2.1 qt (2.0 L) 0.63 qt. (0.6 L) 125# (56.8 kg)

  • Page 4: General Safety

    This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT CR Power Rake. This symbol indicates the engine oil level should be checked before operating this equipment.
  • Page 5 DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running.

  • Page 6: Vibration Data

    SOUND Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 2-9-2002 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model.

  • Page 7: Instruction Labels

    INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.

  • Page 8: Packing Checklist & Assembly

    PACKING CHECKLIST Your Billy Goat Power Rake is shipped from the factory in one carton, completely assembled. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached and folded over PUT OIL IN ENGINE BEFORE STARTING PARTS BAG &...

  • Page 9: Operation

    OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used.
  • Page 10 REMOVE THATCH/STEMS: After verti-cutting, a layer of thatch and cut stems will be deposited over the top of the lawn. We suggest the use of a lawn vacuum or wheeled blower for collection and removal of the thatch/stems. RAKING/SLICING TIPS THATCH: Thatch is a dense layer of dead grass, clippings, and roots that builds up over time at the base of the lawn preventing air, water, and fertilizer from reaching the soil.

  • Page 11: Maintenance

    MAINTENANCE ERIODIC AINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Inspect for loose, worn or damaged parts. Check engine oil Inspect belt Engine (See Engine Manual) Grease reel bearings Inspect and clean engine air filter Oil height adjustment linkage FLAIL BLADE WEAR 1.

  • Page 12: Warranty Claim Procedure

    Warranty Claim. • The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. • The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination.

  • Page 13: Illustrated Parts & Parts Lists

    CR Owner’s Manual PARTS DRAWING CR550HC Part No 350245 Form No F062206A...

  • Page 14: Parts List

    PARTS LIST i t e m P A R T S n o . L I S T P u l l e y 3 . 0 " O . D . P u l l e y 5 . 5 " O . D . X ¾ " W h e e l 8 "...
  • Page 15 FLAIL REEL ASSY 350241 item SHAFT FLAIL BLADE BLADE FLAIL SPACER BUMPER 5/8"X 1/4" SPACER BUMPER 5/8" x 1/2" SHAFT WA FLAIL REEL CLIP LOCK 1/2" WASHER 1/2 SAE FLAIL SHAFT KIT 350185 item PARTS Part No. QTY LIST 73 SHAFT FLAIL BLADE 350141 78 CLIP LOCK 1/2"...
  • Page 16 SPACER BUMPER KIT 350258 item PARTS LIST Part No. SPACER BUMPER 5/8" x 1/4" 350143 SPACER BUMPER 5/8" x 1/2" 350144 SLICING REEL ASSY 350252 item LOCK WASHER 5/16 TWISTED TOOTH SCREWCAP 5/16 - 24 X 1" GR. 5 SHAFT SLICING WA BLADE SLICING REEL PLATE BLADE MTG.

Table of Contents

Save PDF