Uniform Levelling And Straightness Of Conveyor Section; Installing The Ac Belt; Figure 10: Diagonal Measurement For Conveyor Section - TOYOTA ADVANCED LOGISTICS Bastian SOLUTIONS BSBAC 1 HP Installation And Maintenance Manual

5.2 Uniform Levelling and Straightness of Conveyor Section

The straightness of the BSBAC sections is critical to the performance of the conveyor. Please ensure that
the conveyor bed sections are checked for uniform level and straightness. To check for uniform levelling,
use a large level guide to confirm that all conveyor sections are appropriately levelled. To ensure that the
conveyor sections are straight and square, measure the diagonals of each conveyor section. Figure 10
illustrates the diagonal measurement for the conveyor sections.
If the dimension of diagonal A and diagonal B of the bed section are within 1/16" of each other,
•
then the bed is sufficiently square.
If the two diagonals of the bed section are different by more than 1/16", adjust the splice plate and
•
floor support mounting hardware.
If this adjustment is not sufficient, attach turnbuckles under the conveyor section and adjust for
•
square accordingly. Turnbuckles are typically installed to the bottom mounting holes of the
sideframe of a BSBAC section.
Bastian Solutions does not supply turnbuckle kits for additional section straightness
adjustments.

5.3 Installing the AC Belt

Bastian Solutions BSBAC conveyor comes available with four standard belt types. The belt and additional
documentation are as follows:
1. Rough Top Belt – The Rough top belt is a "trackmate" general purpose nonwoven PVC heavy
conveyor belt with a rough top (one side only). The product data sheet is called Habasit Heavy
Conveyor Belts TM120RT-B (Code: H250000385).
2. Longitudinal Rib Belt – The Longitudinal Rib Belt is a "trackmate" general purpose nonwoven
PVC heavy conveyor belt with a longitudinal groove structure. The product data sheet is called
Habasit Heavy Conveyor Belts TM120LR-B (Code: H250000441).
3. Brushed Top Belt – The brushed top is a rubber saturated "ulti-mate" nonwoven heavy conveyor
belt with an impregnated fleece on one side. The product sheet is called Habasit Heavy Conveyor
Belts UMS130SC-B (Code: H250000560).
4. Glide Top Belt – The glide top belt is a rubber conveyor and processing belt with a low friction
surface. The product sheet is called Habasit Product Data Sheet RGLIDE-T.
Published January 2022
Installation & Maintenance Manual: BSBAC 1 HP
Diagonal A

Figure 10: Diagonal measurement for conveyor section

Rev. B
Diagonal B
20