MK1100 has the following BSBAC sections, organized from upstream to downstream:
SECTION 1 - BSBAC tail section, 12" OAL, 24" OAW
•
SECTION 2 - BSBAC noseover section, 42" OAL, 24" OAW
•
SECTION 3 - BSBAC bed section, 120" OAL, 24" OAW
•
•
SECTION 4 - BSBAC bed section, 60" OAL, 24" OAW
•
SECTION 5 - BSBAC drive section, 1HP motor side left, 120" OAL, 24" OAL
SECTION 6 - BSBAC tail section, 12" OAL, 24" OAW
•
The BSBAC power feeder section is the last section in the list above but will be part of
a different mark number. In this example, the mark number for the BSBAC power
feeder is "MK1100-PF".
Each BSBAC section will have (2) stickers on the side frame. One sticker on the upstream side of the
conveyor frame, and the other sticker on the downstream side of the conveyor frame. Each sticker
contains the following information.
•
Project Number and Name
Model Type
•
Mark Number
•
•
Match
•
Piece
•
Flow direction
Figure 8 illustrates the mark stickers on the side of the section 1 of MK1100 from the example above.
4.2 Skid Contents
Skids will contain varying combinations of conveyor sections, support structures, accessories, and
pertinent hardware. For protection of product integrity during shipping accessories and supports may be
delivered on separate labeled skids. BSBAC accessories include the following:
Floor supports/Polytier/Ceiling hangers (with mounting hardware)
•
AC belt
•
Underside bed covers (with mounting hardware)
•
•
Guide rail (with mounting hardware)
Published January 2022
Installation & Maintenance Manual: BSBAC 1 HP
Figure 8: BSBAC mark stickers - section 1
Rev. B
17