Table of Contents
Advertisement
Bed
Figure 2: BSBAC Incline 1HP configuration - exploded view
3.1 Drive Section
The BSBAC drive section is a 10' conveyor section that contains the motor, take-up subassembly for the
belt tension and the drive pulley. The BSBAC drive sections are offered in 18", 24", 30", and 36" OAW.
The sub-configurations are based on the motor mount side, i.e left-side and right-side sub-configurations.
The motor mount side is determined by facing downstream of the conveyor.
The left-hand and right-hand sub-configuration of the drive sections are not the same
conveyor assembly but are reversible on site with additional spare parts. In case this
switch needs to be made, please contact your Bastian Solutions' conveyor
representative.
The drive sections are not designed to run backwards. This makes belt tracking very sensitive and
inconsistent on the BSBAC section. Bastian Solutions recommends making the sub-configuration change
with additional spare parts on site. Please contact your Bastian Solutions' conveyor representative for
assistance and information to make the sub-configuration change.
Figure 3 illustrates the BSBAC 1 HP (motor left side) drive section exploded view with a list of spare parts.
Appendix 1 has the general arrangements for the BSBAC 1 HP drive section labelled as GA-BSBAC-
MW-120-0002.
Published January 2022
Installation & Maintenance Manual: BSBAC 1 HP
Noseover
1HP – motor
side left -
Drive Section
Rev. B
Tail
10
Advertisement
Table of Contents
