Table of Contents
Advertisement
3.4 Noseover Section
The BSBAC noseover section is a 42" conveyor section that is vertically sectioned to allow for angular
adjustment between 0 to 25 degrees. The angular adjustment can be made by adjusting the hardware in
the bottom of the channel in the side frame on both sides. The BSBAC noseover section is offered in 18",
24", 30" and 36" OAW. The BSBAC noseover section is identical for all BSBAC configurations.
The BSBAC noseover section is a recommended conveyor section for a BSBAC
incline/decline conveyor. An incline/decline BSBAC conveyor without a noseover
section can result in damage to the package conveyed due to rough transitions
between incline/decline and straight sections.
Figure 6 illustrates the BSBAC noseover section exploded view with a list of spare parts. Appendix 1 has
the general arrangements for the BSBAC noseover section labelled as GA-BSBAC-MW-42-0001.
The BSBAC noseover section does not come standard with underside covers. The
underside covers for the BSBAC noseover section need to be ordered separately as an
accessory.
Published January 2022
Installation & Maintenance Manual: BSBAC 1 HP
Figure 6: BSBAC noseover section - exploded view
Rev. B
14
Advertisement
Table of Contents
