SRAM RockShox Super Deluxe Coil Service Manual page 39

23 Clean the shock.
24
Install the coil spring and spring retainer.
Adjust the spring preload adjuster until the coil spring contacts the
spring retainer. Ensure that there is no vertical play between the coil
spring and the retainer by holding the spring and trying to pull on the
shock body.
Do not exceed 5 mm (or five full turns of rotation) on the spring
preload adjuster as this will damage the shock. If more than 5 turns
are necessary to achieve proper sag, use a higher weight spring.
25 Refer to the rebound and compression settings that you wrote down
for your shock at the beginning of the service. Set each adjuster to the
recorded number of clicks/turns.
NOTI CE
Super Deluxe Coil Assembly and Bleed
39