SRAM RockShox Super Deluxe Coil Service Manual page 29

27 Apply Loctite to the first 3 threads of the damper shaft.
28
Install the sealhead assembly onto the damper shaft.
29 Install the top out plate onto the damper shaft.
30 Install the compression shim stack, top out plate, and check shim stack
onto the damper shaft.
Keep the piston assembly parts in the order they were removed. Do
not separate any parts from the piston assembly.
If any piston assembly parts are installed in the incorrect order,
the piston assembly, including the tune shim stacks, must be
reassembled in the correct order for proper shock function. Refer
to the Rear Suspension Shim Tuning Guide for piston assembly and
shim stack configurations.
NOTI CE
Loctite 2760 Threadlocker (Red)
29
Damper and IFP Service