SRAM RockShox Super Deluxe Coil Service Manual page 36

12 Clamp the body eyelet into the vise.
Install the bleed screw into the IFP bleed port and tighten until the IFP
begins to spin.
13
Remove the shock from the vise and pour any excess oil that may be
above the IFP into an oil pan. Wipe the inside of the IFP reservoir with
a shop towel.
Do not spray RockShox Suspension Cleaner or isopropyl alcohol into
the reservoir. Isopropyl alcohol can cause o-rings to become brittle
and crack.
14 To check the bleed quality, install the IFP Height Tool into the IFP
reservoir and apply force to the IFP Height Tool (approximately 25 lbs).
The IFP should feel firm and should not compress. If the bleed check
window is compressed beneath the edge of the reservoir, the system
will need to be re-bled. To re-bleed the system, remove the IFP
reservoir and the IFP, and return to
section.
NOTI CE
step 5 of the IFP Reservoir Service
IFP Height Tool
Super Deluxe Coil Assembly and Bleed
T10
Bleed Check Window
36