Table of Contents
Advertisement
16
Remove the bottom post.
Slide the upper shim stack, main piston, lower shim stack, and topout
plate off the shaft and onto a small hex wrench or pick.
Keep the piston assembly parts in the order they were removed. Do
no separate any parts from the piston assembly.
If any piston assembly parts are installed in the incorrect order,
the piston assembly, including the tune shim stacks, must be
reassembled in the correct order for proper shock function. Refer
to the Rear Suspension Shim Tuning Guide for piston assembly and
shim stack configurations.
17
Remove the sealhead from the damper shaft.
18
Pull the Counter Measure spring from the sealhead.
NOTI CE
12 mm
26
Damper and IFP Service
Advertisement
Table of Contents
