Heartland VALUE CLASSIC Assembly Manual page 60

PARTS REQUIRED:
23-7/8" x 47-7/8"
x2
(59,7 x 121,9 cm)
x1
Maintain spacing between the center of the rafters at the lower edge of the panels (Fig. D).
6
Secure panels with (1) 2" nail into each rafter, as shown.
Move to the top of the panel and keep spacing between the center of the rafters.
Secure panels with (1) 2" nail into each rafter.
24-3/8" 24"
(61,9 cm) (60,9 cm)
2" (5,1 cm) Nails
Install 23-1/2" x 96" roof panel with a 3/4" measurement on the rafter (Fig A) and flush to the upper installed panels.
7
Secure panels with (1) 2" nail in each corner.
Install 23-7/8" x 47-7/8", 23-7/8" x 23-1/2 and 2nd 23-7/8" x 47-7/8" roof panels flush to the installed panels.
8
Secure panels with (1) 2" nail in each corner.
Flush
Flush
10' x 18' ROOF PANELS
x1
23-1/2" x 96"
(59,7 x 243,8 cm)
NOTE:
Measurements from inside of gable panels
24" 24"
(60,9 cm) (60,9 cm)
Flush
Gauge Block
Flush
2" (5,1 cm)
Nails
23-1/2" x 23-7/8"
(59,7 x 60,6 cm)
3/4" GAUGE
Fig. D
24" 24"
(60,9 cm) (60,9 cm)
3/4"
(1,9 cm)
Fig. A
Flush
58
x26
2" (5,1 cm)
BLOCK
24" 24"
(60,9 cm) (60,9 cm)
Flush
24-3/8"
(61,9 cm)