Advertisement
PARTS REQUIRED:
x1
Roof panels may cause serious injury until securely fastened.
Note: Install all roof panels with the rough side up (painted grid lines).
BEGIN
1
Place the 48" x 96" panel on rafters with a
3/4" measurement on the rafter (Fig A)
and the panel flush at the peak (Fig. B).
Secure panel with (2) 2" nails in the corners.
Gauge Block
2
Move to the opposite end.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top corner
is flush to the peak (Fig. B) and there is a 3/4"
measurement on the rafter (Fig. C).
Secure panel with (2) 2" nails in the corners.
10' x 18' ROOF PANELS
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
3/4"
(1,9 cm)
Fig. A
Gauge Block
Fig. C
3/4"
(1,9 cm)
3/4" GAUGE
BLOCK
Two
Nails
56
x4
2" (5,1 cm)
Flush at
peak
Fig. B
Fig. B
Flush at
peak
Two
Nails
Advertisement
