GLP impression X5 Quick Start And Safety Manual page 25

German Light Products
Installation
Operating position: any (angles other than hanging vertically require X5 Omega
Bracket with Handles accessory)
Location: Dry location only
Mounting: Fastened to surface or structure, or standing on supplied floor stand
Mounting points: One pair of camlock fastener points, one M10 threaded hole
Safety cable attachment points: Two in fixture baseplate
Floor stand stabilizing strap attachment points: Slots in supplied X5 Tripod floor stand
Minimum center-to-center distance: 465 mm / 18.3 in.
Minimum distance to illuminated surfaces: 1 m / 40 in.
Minimum distance to combustible materials: 0.1 m / 4 in.
Connectors
DMX data IN and THRU via DMX cable: 5-pin XLR
DMX data IN and THRU via Art-Net and sACN: Fail-safe EtherCON
Mains power IN and THRU: Neutrik powerCON TRUE1
Construction
Ingress protection: IP20
Standard color: Black (custom on request)
Housing: High-impact flame-resistant thermoplastic, aluminum
Service-friendly air filter change system
GLP iQ.Mesh module with NFC sensor for GLP iQ.Mesh connectivity (linking with for
example GLP iQ.Service, GLP Collect&Connect etc.)
Accessories supplied
X5 Tripod floor stand
Power cable with Neutrik powerCON TRUE1 connector
Dimensions and weight
Width (head at max. horizontal extension): 724 mm / 28.6 in.
Width across yoke: 492 mm / 19.4 in
Height (head vertical): 773 mm / 30.5 in
Height (head at max. vertical extension): 794 mm / 31.3 in.
Height incl. X5 Tripod floor stand (head vertical): 799 mm / 31.5 in
Height incl. X5 Tripod floor stand (head at max. vertical extension): 820 mm / 32.3 in.
Weight (fixture only): 13.3 kg / 29.3 lbs.
Weight (fixture incl. X5 Tripod floor stand): 14.4 kg / 31.7 lbs.
impression X5 Quick Start and Safety Manual Rev. 20220505-01
®
impression X5
25