Table of Contents
Advertisement
Base Module
2.2.9.
DAT Unit
An optional DAT unit can be installed in the I/O module.
2.2.9.1.
Location of Index Labels
The figure below shows the location of index labels attached to the digital audio tape.
2.2.9.2.
Notes on Index Labels
(1) Attach index labels properly as shown in 2.2.9.1. Be sure to write the start date on these
labels.
(2) Change the labels when the DAT is used for other purpose. Remove the old labels before
attaching the new labels.
(3) When using index labels other than those supplied by NEC, make sure that they are in the
right size and easy to remove without remnant paste.
2.2.9.3.
Preventing Accidental Erasure of Data
Open the write protect slider next to the side label of the cartridge to prevent data on the DAT
from being erased by accident. Write on the DAT is permitted by closing the write protect slider.
Figure. Preventing Accidental Erasure of Data on DAT (Write Protect)
855-900549
NEC
Figure. Index Labels on the Digital Audio Tape
2-8
Advertisement
Table of Contents
