NEC 5020M-16 Operation Manual page 126

Command
ls ls [-b] [-r] [-a [attrib]] [file]
map map [-r|-v|-d] [sname]
[handle] [-b]
memmap memmap [-b]
mkdir mkdir dir [dir ...]
mm mm Address [Width 1|2|4|8]
[;MMIO| ; MEM| ; IO | ;PCI]
[:Value] [-n]
mode mode [row col]
mount mount BlkDevice [sname]
mv mv src [src ...] [dst]
OpenInfo OpenInfo Handle
pause pause
pci pci [Bus Dev [Func] [-i] [-s
[Seg]]]
reset reset [-w [string]]
rm rm [-q] file [file ...]
rm [-q] directory
[directory ...]
set set [-d|-v|-b] [sname [value]]
setsize setsize newsize file
stall stall microseconds
time time [hh:mm[:ss]]
touch touch [-r] filename
type type [-a|-u] [-b] file [file ...]
unload unload [-n] [-v] HandleIndex
ver ver
Description
Display directories/file lists.
Display/define mapping information.
Display memory map.
Create a directory.
Display/change MEM/IO/PCI.
Display/change the console output device
mode.
Mount the file system on the block device.
Move a file/directory.
Display the handle/agent protocol.
Pause for an entry with a message displayed.
Display the PCI device configuration space.
Reset the system.
Delete file/directory.
Display/create/change/delete the EFI
environmental variable.
Set the file size.
Stall the processor in microseconds.
Display the current time, or set time.
Set the current time and date in the time and
date attribute of a file.
Display contents of a file.
Unload the protocol image.
Displays version information.
3-17
Operation Procedure
855-900549