Fv (Firmware Versions) - NEC 5020M-16 Operation Manual

Base Module
2.4.6.6.

FV (Firmware Versions)

m
X
* Always valid without regard to the current system status.
Function:
This command is used to show version information for the iSPFW and BIOS.
This command also provides checksum test on the FW storage areas.
Note that, in a duplicated iSP environment, information is managed separately for each of the
duplicated iSPs.
Also the display information may slightly change from one SPFW version to another.
(Screen Example)
iSPyz:--->
Firmware Versions : (currently running firmware is Rxx.xx)
iSP BOOT
iSP FW bank (*)
BIOS bank0
BIOS bank1
BIOS bank2
Do you want to check the flash memory? (y/[n]) :
checking iSP BOOT bank...
passed.
checking iSP FW bank...
passed.
checking BIOS bank0...
passed.
checking BIOS bank1...
passed.
checking BIOS bank2...
passed.
FV command terminated.
(Description)
Description
No.
(a)
(b)
(c)
855-900549
b u
X X
<ENTER>
fv
(*) : xx.xx generated on mm/dd/yyyy hh:mm:ss
: xx.xx generated on mm/dd/yyyy hh:mm:ss
(012 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
( 345 ) : xx.xx generated on mm/dd/yyyy hh:mm:ss
( 67) : xx.xx generated on mm/dd/yyyy hh:mm:ss
Lists the current states of the FW storage areas.
If a checksum test on the FW storage area is needed, enter "y."
Lists the results of checksum test.
<ENTER>
y
Description
2-44
Description
No.
(a)
(b)
(c)