NEC 5020M-16 Operation Manual page 77

Base Module
(Screen Example ... Help Screen)
iSPyz:--->
iSP FW version is Rxx.xx.
<ENTER>
HC> help
HC command help :
help
disp
smem
attach
detach
swap
add
delete
enable
disable
online
offline
led
loc
clear
check
bio
scsi_split : set/reset split mode of SCIS on PCIBAY
quit
(Description)
Description
No.
(a)
(b)
(Screen Example ... ALL Screen)
iSPyz:--->
iSP FW version is Rxx.xx.
HC> disp all
(32Way) The CIMB-CELL interleave memory size is only shown for the 32Way(B) model.
When operating in inter-CELL interleave mode, an asterisk "*" appears.
==== Partitioning ==================================== 19:20:23,07/31/2005 ===
part0(RUN ) CELL:01-----7 (01-----2) IOX:0-----67 (0-----12) CIMB: 32GB*
part1(INIT) CELL:--2----- (--5-----) IOX:-1------ (-0------) CIMB:128GB
part2(stop) CELL:---3---- (---4----) IOX:--2----- (--0-----) CIMB:-----
part3(stop) CELL:------6- (------3-) IOX:---3---- (---0----) CIMB:-----
part4(----) CELL:-------- (--------) IOX:-------- (--------) CIMB:-----
part5(----) CELL:-------- (--------) IOX:-------- (--------) CIMB:-----
part6(----) CELL:-------- (--------) IOX:-------- (--------) CIMB:-----
855-900549
<ENTER>
hc
: print this message.
: display current status.
: set size of shared memory of a partition.
: attach CELLs and IOXs to a partition.
: detach CELLs and IOXs from a partition.
: swap CELLs in a partition.
: add a component.
: delete a component.
: enable a component.
: disable a component.
: make a component online.
: make a component offline.
: turn on/off maintenance LED of a component.
: set location info.
: clear memory bit error counters.
: check illegal configuration.
: add and set a bio to a pcibay.
: quit from HC command prompt.
If "help" is entered, the HC command help opens.
An HC command list appears.
<ENTER>
hc
<ENTER>
Description
2-58
Description
No.
(a)
(b)
Description
No.
(a)