He (Help) - NEC 5020M-16 Operation Manual

2.4.6.8.

HE (Help)

m
X
* Always valid without regard to the current system status.
Function:
This command is used to show a command list.
("HELP" is also usable as well as "HE.")
(Screen Example)
iSPyz:--->
iSP commands :
System Control (both customers and maintenance persons)
DF ‒ Shut down the system (override)
DN - Shut down the system
DP - Generate the system dump interrupt
PC - Power cycle
RS - Cold reset the system
UB ‒ Bring up BIOS
UP - Bring up the System
Configuration (both customers and maintenance persons)
HC - Hardware configuration and partitioning
Miscellaneous (both customers and maintenance persons)
CM - Change SP command mode to maintenance mode
DT - SP Date and Time
EN - Display environmental information
FV - Display firmware versions
HE - Display this help
ML - Display message log
Settings (both customers and maintenance persons)
SG ‒ SP/System settings
SR - Save and restore system CMOS/NvRAM to/from FTP server
HE command terminated.
(Description)
Description
No.
(a)
b u
X X
<ENTER>
he
Shows the help for commands.
Description
2-71
Base Module
Description
No.
(a)
855-900549