Table of Contents
Advertisement
Base Module
cmd
memdx
pcibx
delete
-
<arg1>
enable
-
855-900549
arg1
arg2
arg3
-
-
d|e
[core]
-
-
-
-
-
-
arg4
-
This command is only valid to the 32Way
model.
Use it to add MMX (2-3) and ROW to the
memory daughter card. The DIMM capacity
is automatically read when it is being
initialized.
x is the physical number of the CELL Card
(0-7).
-
Add PCI Bays.
x is a DGI/I2C port number on the iSP side
(0-7).
Use arg2 to specify the type of the PCI Bay
(mandatory). Specify "d" for PCID-Bays, and
"e" for PCIE-Bays.
Specify "core" for arg3 if Core Cards (GXB)
are installed.
If the type of the PCI Bay (PCID/PCIE) or the
presence of the Core Card has been
changed, the SP will know that change from
the revision information for that PCI Bay.
-
Use this command to delete components
from iSP management. If physically removed
components are left under iSP management,
they will be handled as an "INVISIBLE" error
indefinitely.
If no argument is specified or an argument
has an error, the delete command help
opens.
Components in DC-ON state are unable to
be deleted (with the exception of the CLK
and DPS).
The CELL Card, XBX Card, PCI Bay, or their
subcomponents is unable to be deleted if
any of the partitions within the system is
booting up, shutting down, or handling an
error.
-
<arg1> is identical to that for the add
command.
-
Use this command to enable the
components that are currently "DISABLED."
If no argument is specified or an argument
has an error, the enable command help
opens.
This command is valid only if the partition to
which the pertinent components belong is
not active.
The CELL Card, XBX Card, PCIX, and their
subcomponents can be enabled unless any
of the partitions within the system is booting
up, shutting down, or handling an error.
The Power Bay can be enabled only if none
of the partitions within the system is active.
2-50
Description
Advertisement
Table of Contents
