NEC 5020M-16 Operation Manual page 121

Operation Procedure
1) SP console screen and operation during AC LINK setup
iSPyz:---> sg
Display and modify settings of system and iSP.
s) System settings
i) iSP settings
a) display all settings
Select ? (s/i/a/CR=exit) : s
System setting menu:
c) system common settings (maintenance only)
p) partition settings (maintenance only)
b) partition boot methods and Hot-plug permission
a) display all settings
Select ? (c/p/b/a/CR=back) : b
Partition boot methods and Hot-plug permissions:
¦ ¦Wake ¦Hot-Plug permission
part.¦AC- ¦ On ¦ PCI-card
¦LINK ¦ LAN ¦PCI(X)¦PCE-EX¦ add ¦remv ¦swap
-----+-----+-----+------+------+-----+-----+-----
0 ¦ off ¦ off ¦ YES ¦ no
1 ¦ off ¦ off ¦ YES ¦ no
Modify? (y/[n]) : y
Enter partition number? (0-7/CR=back) : 0
AC link mode (o[n]/of[f]/CR=skip)
Wake on LAN (o[n]/of[f]/CR=skip)
Hot plug permission:
PCI(X) card? (y[es]/n[o]/CR=skip) :
PCI-Ex card? (y[es]/n[o]/CR=skip) :
(Omitted)
Enter partition number? (0-7/CR=back) :
855-900549
<ENTER>
¦
¦ no ¦ no ¦ no
¦ no ¦ no ¦ no
<= Enter
<= Enter
<= Enter
CELL
<= Enter
: <= Enable AC LINK
:
3-12
sg and press Enter
s and press Enter
b and press Enter
y and press Enter
and press Enter