Add A Boot Option - NEC 5020M-16 Operation Manual

Operation Procedure
3.5.7.2.

Add a Boot Option

To add a new boot option to the EFI Shell, select [Add a Boot Option] on the Main Menu, and
follow the steps below.
1. Select a device containing the boot file.
2. Select a file in the device.
Image of the Add a Boot Option screen
EFI Boot Maintenance Manager ver 1.10[14.62]
Add A Boot Option, Select a Volume:
IA64_EFI [Acpi(PNP0A03,3)/Pci(2|0)Scsi(Pun0,Lun0)/HD(Part1,Sig0
Default Boot [Acpi(PNP0A03,3)/Pci(2|0)/Scsi(Pun0,Lun0)]
Default Boot [Acpi(PNP0A03,0)/Pci(2|1)/Ata(Primary,Master)]
LoadFileAcpi(PNP0A03,0)/Pci(2|0)/SCSI(Pun0,Lun0)/HD(Part1,Sig0A7C0000)
Load File [EFI Shell [Built-in]]
3. Enter a file name (prerequisite: a ASCII or Unicode file name within 240 characters).
4. Select A, U or N, and press the <Enter> key.
5. Confirm that the new boot option was added, and save the change.
6. The new description is entered in the EFI Boot Menu screen.
Image of the Add a Boot Option screen
Filename:xxxxxxxxxxxxxxxx
DevicePath:xxxxxxxxxxxxxx
Enter New Description: OSLOADER
Enter New Option Data Type [A-Ascii, U-Unicode, N-No BootOption]
:Ascii
Enter Boot Option Data [Data will be stored in Ascii String]:
Xxxxx
Save change to NVRAM [Y-Yes N-No]:
855-900549
Specify the boot parameter for starting the application.
Save the change in NVRAM
3-26
を選択すると階層を表示し
Add
Select Add Boot to display the directory tree,
and select a directory from the tree to enter
ディレクトリを選択して実行プログ
the boot program.
登 録 で き ま
Specify the title of the new description to enter in the EFI Bo