Renesas H8S Series User Manual page 26

H8S, H8SX Family E10A-USB Emulator
Table 2.8 Items in [External Flash memory setting] Dialog Box
No. Item
1 Select External Flash setting
file
2 Use External Flash memory
3 Erasing External Flash
memory at Link up
4 File name
5 Module offset address
6 Module top address
7 Initialize module address
8 Erasing module address
R20UT2526EJ0300 Rev. 3.00
Mar 14, 2013
Section 2 Specification of the Emulator's Software
Description
Specify the data file (*.EFF) for setting the external flash
memory. If not specified, select the setting of [recent setting
data] (data previously changed) in the combo box. To make a
new setting, select [initialize] and input data.
Enable or disable use of the external flash memory debugging
function.
Checked: Enabled
Not checked: Disabled (default)
Select whether or not to erase the contents of the flash
memory at initiation of the emulator.
Checked: Erases the contents of the flash memory at initiation
of the emulator.
Not checked: Reads the contents of the flash memory at
initiation of the emulator (default).
Specify the file of initialization, write, and erase modules. A
program file must be specified for programming the flash
memory. Prepare a file suitable for the flash memory being
used.
Specify the top address by an offset where the initialization,
write, erasing modules are to be expanded. (Initial value is
H'0). If not specified, disable offset.
Checked: Enables offset.
Not checked: Disables offset (default).
(If the address exceeds H'FFFFFFFF, it will become H'0.)
Specify the top address where the initialization, write, and
erase modules are to be expanded. (The 4-kbyte address
areas starting from that address are saved by the emulator; it
is possible to expand the initialization, write, and erase
modules without affecting on the user program.)
Entry address of the initialization module
The initialization module is used to set the device that is
required for accessing the external flash memory. If not
specified, disable entry.
Checked: Enables entry.
Not checked: Disables entry (default).
Entry address of the erase module
Page 22 of 30