H8S, H8SX Family E10A-USB Emulator
(3) Rate of Measurement Results
Right-click on the [Performance Measurement] window and select [Properties] from the popup
menu, or click on the corresponding icon (
PA1 and PA2.
(4)
Other
•
On PA1, several cycles are added to the count when stepping is performed or the program
ends. So tolerances will be included in the measurement result.
•
When PA2 has been selected but BC1 and BC2 are disabled, the program will not be
executed.
R20UT2526EJ0300 Rev. 3.00
Mar 14, 2013
) to check the rate of measurement results on
Figure 2.9 Rate of Measurement Results
Section 2 Specification of the Emulator's Software
Page 30 of 30