Renesas H8S Series User Manual page 11

H8S, H8SX Family E10A-USB Emulator
Notes: 1. P34/TRST#, P37/TCK, P35/TMS, P63/TDO, P36TDI are used by the emulator. Pull
up and connect the emulator and the MCU pins.
User system
connector
Pins 1, 2, 3, 5, and 6
2. If the emulator is connected to the user system, pull up pin EMLE of the MCU, and
when the emulator is not connected to the user system, ground the EMLE.
The emulator is connected
to the user system.
The emulator is not connected
to the user system.
R20UT2526EJ0300 Rev. 3.00
Mar 14, 2013
Section 1 Connecting the Emulator with the User System
Figure 1.4 Connection of Emulator and MCU
Figure 1.5 Emulator and Pin EMLE
Vcc
4.7 kΩ
Vcc
4.7 k
EMLE
EMLE
MCU
MCU
MCU
Page 7 of 30