Programming Instructions
Command
Syntax
Description
Parameters
Response
Example
Affects
Notes
Command
Syntax
Description
Parameters
Response
Example
Affects
Notes
Command
Syntax
Description
Parameters
Response
Example
Affects
Notes
60
[:SOURce[n]][:CHANnel[m]]:WAVelength:TOGRid
[:SOURce[n]][:CHANnel[m]]:WAVelength:TOGRid<wsp>
<value>[PM|NM|UM|MM|M]
Set the wavelength to the nearest grid point only changing the channel number.
The wavelength value.
none
sour4:wav:togr 1.6um
Only available in "Grid Mode"
The frequency offset is neither changed nor taken into account when calculat-
ing the nearest channel.
[:SOURce[n]][:CHANnel[m]]:WAVelength:AUTO
[:SOURce[n]][:CHANnel[m]]:WAVelength:AUTO<wsp>OFF|0|ON|1
Switch between "Auto Mode" and "Grid Mode", Refer to the chapter "Opera-
tion Modes" on page 34.
OFF or 0: "Grid Mode" (= Auto Mode off)
ON or 1: "Auto Mode"
none
sour1:wav:auto on
This command is equivalent to [:SOURce[n][:CHANnel[m]]:FREQuency:AUTO
[:SOURce[n]][:CHANnel[m]]:WAVelength:AUTO?
[:SOURce[n]][:CHANnel[m]]:WAVelength:AUTO?
Returns the current operation mode.
none
0: "Grid Mode" (= Auto Mode off)
1: "Auto Mode"
sour1:wav:auto?
0
This query is equivalent to [:SOURce[n][:CHANnel[m]]:FREQuency:AUTO?
Agilent 81950A Compact TLS module, First Edition
Detailed Description