Table of Contents
Advertisement
Accessories
Connector Interfaces for straight
connectors
1 ea required
81000FI FC/PC
81000HI E-2000/PC
81000KI SC/PC
81000LI LC/PC
81000MI MU/PC
81000SI DIN 47256/PC
81000VI ST/PC
Note: 819xxA - 072 is highly recommended over 819xxA - 071 to reduce front-panel reflections,
26
Modules and Options
Figure 5
Compact TLS module, and the instruments that support these modules.
Tunable Laser Source
819xxA-071
PMF
Straight contact
connector
Connector
Interfaces for
straight connectors
which will greatly reduce interference noise and spectral ripple in the test setup.
Figure 5 Mainframes, Tunable Laser Module, and Options
shows all the options that are available for Agilent 81950A
High Power Compact Tunable Laser module
High Power
81950A Compact Tunable Laser Source 1527nm-1566nm
Compact
Option 210
81980A Compact Tunable Laser 1465 nm - 1575 nm
81940A Compact Tunable Laser 1520 nm - 1630 nm
81950A Compact Tunable Laser Source 1570-1609nm
module
81989A Compact Tunable Laser 1465 nm - 1575 nm
Option 201
81949A Compact Tunable Laser 1520 nm - 1630 nm
819xxA-072
PMF
Angled contact
connector
Connector
Interfaces for
angled connectors
Modules and Options
MANDATORY AND MUTUALLY EXCLUSIVE
OPTIONAL
Connector Interfaces for angled connectors
1 ea required
81000FI FC/APC keywidth 2.2mm
81000NI FC/APC keywidth 2.0mm
81000HI E-2000/APC
81000KI SC/APC
81000LI LC/APC
81000MI MU/APC
81000SI DIN 47256/APC
81000VI ST/APC
Agilent 81950A Compact TLS module, First Edition
Advertisement
Table of Contents
