Canon imageRUNNER ADVANCE C2000 Series Technical Workbook page 148

Points to note during service work
When the right door guide [3] is replaced with a new right door guide [4] (FL0-1354-000), remove the two
extraction roller sheets [2] and clean the surface with alcohol. Since the two right door lower sheets [1] are
attached to the old right door guide (FC0-2627-000), removing the sheets is unnecessary.
SERVICING:
[Reference]
Procedure to replace the old right door guide [3] with the new type is as follows:
1) Remove the rear upper cover, the right upper sub cover and the rear cover.
Remove the cassette right upper sub cover 1 and the cassette right upper sub cover 2 from 2 bosses each
2)
[a].
TP13 303.pdf
e-Support Filename:
08-07-13
Date:
Page 2 of 8