Pitney Bowes SendPro C Auto Operator's Manual page 51

Connectivity information
3. Select DHCP.
4. Tap Connect.
5. If it does not connect, unplug the power cord.
6. Wait 30 seconds. The screen should turn off after 10 seconds.
7. Plug the power cord back in directly into a wall outlet.
8. Quickly tap and release the power button to turn the device back on.
9. Tap Settings.
10. Tap Wired (Ethernet).
11. Tap DHCP.
12. Tap Connect.
Static IP
1. Tap Settings.
Pitney Bowes Operator Guide April 2022 51