Pitney Bowes SendPro C Auto Operator's Manual page 29

Quick start guide
4. Push the stack into the feeder until you feel resistance. The image shows how far into the feeder
you need to position the stack. The side guide is pulled away to show the edge of the envelopes.
5. Set the desired moistener setting for your envelopes. In this photo "no seal" is selected.
6. Tap Start on the Envelope Printing or Print on Envelopes screen. The device automatically
feeds the envelopes and prints the postage.
If you are using a stacker, extend the stacker tray so that the envelopes exit the feeder
l
completely.
If you are moistening the envelope flaps, press down on the envelopes after printing to
l
ensure the flaps are securely glued closed.
Pitney Bowes Operator Guide April 2022 29