Printing Postage On Tapes; Sending A First-Class Mail Envelope - Pitney Bowes SendPro C Auto Operator's Manual

Printing postage on tapes

If it is not possible to print postage directly onto your envelope, you can print it onto a tape. You can
then apply the tape to the envelope.
1. Push the tape lever to the right and hold it there (a). Drop a stack of strip tapes down into the slot
(b). Make sure that the printable side faces to the right (toward the touchscreen).
2. Tap Envelope Printing or Print on Envelopes on the Home screen.
3. Select the postage mode and settings (account, class and special service, weight).
4. For a single tape, tap Tape. The default value is set to 1 tape.
For multiple tapes, tap the number on the tape field and use the keypad to enter the number
l
of tapes.

Sending a First-Class Mail envelope

First-Class Mail is an economical way to send mailpieces through the USPS. You can send standard
postcards, letters, and large envelopes and small packages up to 15.99 ounces.
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. If you have the accounting feature enabled, tap Account and select an account.
3. Tap Class.
4. Tap Start Over to show a list of all the available classes.
5. Tap First-Class Retail Metered for a First-Class Mail envelope.
6. Tap Letter.
7. Select any special services you wish to use.
8. Tap Apply.
9. Place the envelope on the scale. The weight appears.
Pitney Bowes Operator Guide April 2022
Quick start guide
30